Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Holcobatch Dark Grey 93-10-22565
- Product Form
- Mixture
- Product Code
- 93-10-22565
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Industrial use, Additives, Colouring agents
Uses advised against
No additional information available
Manufacturers & Suppliers
HOLLAND COLOURS Europe BV
manufacturer
Halvemaanweg 1, P.O. Box 720, 7323 RW Apeldoorn - The Netherlands
+31 55 368 0700
http://www.hollandcolours.com
Emergency Contacts
Emergency Contact
+31 (0) 55 368 0700
08:30 - 17:00 hrs. (GMT+01:00)
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
This mixture does not contain any substances to be mentioned according to the criteria of section 3.2 of REACH annex II
First Aid Measures
Emergency procedures for chemical exposure incidents
Allow affected person to breathe fresh air. If you feel unwell, seek medical advice. Allow the victim to rest.
Symptoms: Cough.
After contact with skin, take off immediately all contaminated clothing, and wash immediately with plenty of water and soap. Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse.
Symptoms: Slight irritation.
In case of dust contact with eyes, rinse immediately with plenty of water. Rinse immediately with plenty of water. Obtain medical attention if pain, blinking or redness persists.
Symptoms: redness, itching, tears. Slight irritation.
If swallowed, seek medical advice immediately and show this container or label. Rinse mouth. Do not induce vomiting. Do NOT induce vomiting. Obtain emergency medical attention.
Symptoms: Ingestion unlikely.
Immediate Medical Attention
If swallowed, seek medical advice immediately and show this container or label. Obtain emergency medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
All extinguishing agents can be used. Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Not specifically applicable. Do not use a heavy water stream.
Not flammable. No direct explosion hazard.
Exercise caution when fighting any chemical fire. Use water spray or fog for cooling exposed containers.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate unnecessary personnel. Ventilate area.
Avoid release to the environment. Prevent entry to sewers and public waters.
Take up mechanically (sweeping, shovelling) and collect in suitable container for disposal. On land, sweep or shovel into suitable containers.
Materials: suitable container
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid dust formation. Use personal protective equipment as required. Avoid contact with skin, eyes and clothing. Do not breathe dust. Do not subject to grinding, shock, friction. Floors, walls and other surfaces in the hazard area must be cleaned regularly. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapour.
Store in original container. Store away from heat. Keep only in the original container in a cool, well ventilated place away from : Keep container closed when not in use.
Do not eat, drink or smoke when using this product. Wash contaminated clothing before reuse. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
No flames, no sparks. Eliminate all sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation to minimize dust and/or vapour concentrations.
protective gloves. Wear protective gloves.
Safety glasses.
Dust formation: dust mask. In case of insufficient ventilation, wear suitable respiratory equipment. Where exposure through inhalation may occur from use, respiratory protection equipment is recommended. Wear appropriate mask. Effective dust mask
Wear suitable protective clothing
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of use. Risk of explosion if heated under confinement. Not established.
Stable at ambient temperature and under normal conditions of use.
Decomposes on exposure to temperature rise: release of (highly) toxic gases/vapours.
Heat. Refer to Section 10 on Incompatible Materials.
Strong acids, strong bases and strong oxidants. Strong acids. Strong bases.
Carbon monoxide. Carbon dioxide. Hydrochloric acid fumes may be generated. Nitrous fumes. fume.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not applicable
- Shipping Name
- Not applicable
- Transport Class
- Not applicable
- Packing Group
- Not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
No additional information available
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Holcobatch Dark Grey 93-10-22565?
The signal word is no signal word.
What is the physical form of Holcobatch Dark Grey 93-10-22565?
Holcobatch Dark Grey 93-10-22565 is a solid appearing as powder. with dark grey. color. It has characteristic. odor.
What is the solubility of Holcobatch Dark Grey 93-10-22565?
Water: Not soluble in water, so only minimally biodegradable Organic solvent: Soluble in organic solvents
What is Holcobatch Dark Grey 93-10-22565 used for?
Industrial use, Additives, Colouring agents
What is the melting point of Holcobatch Dark Grey 93-10-22565?
The melting point is 80 - 90 °C and the boiling point is No data available.