NextSDS Logo
Safety Data Sheet EN

Holcobatch Beige 93-10-23582

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Holcobatch Beige 93-10-23582
Product Form
Mixture
Product Code
93-10-23582

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Industrial use, Additives, Colouring agents

Uses advised against

No additional information available

Manufacturers & Suppliers

HOLLAND COLOURS Europe BV logo

HOLLAND COLOURS Europe BV

manufacturer

Halvemaanweg 1, P.O. Box 720, 7323 RW Apeldoorn - The Netherlands

+31 55 368 0700

http://www.hollandcolours.com

Emergency Contacts

Emergency Contact

+31 (0) 55 368 0700

08:30 - 17:00 hrs. (GMT+01:00)

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
2,2'-[(3,3'-dichloro[1,1'-biphenyl]-4,4'-diyl)bis(azo)]bis[N-(4-chloro-2,5-dimethoxyphenyl)-3-oxobutyramide EC: 226-939-8 5567-15-7 0.1 - 1% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Allow affected person to breathe fresh air. If you feel unwell, seek medical advice. Allow the victim to rest.

Symptoms: Cough.

Skin contact

After contact with skin, take off immediately all contaminated clothing, and wash immediately with plenty of water and soap. Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse.

Symptoms: Slight irritation.

Eye contact

In case of dust contact with eyes, rinse immediately with plenty of water. Rinse immediately with plenty of water. Obtain medical attention if pain, blinking or redness persists.

Symptoms: redness, itching, tears. Slight irritation.

Ingestion

If swallowed, seek medical advice immediately and show this container or label. Rinse mouth. Do not induce vomiting. Do NOT induce vomiting. Obtain emergency medical attention.

Symptoms: Ingestion unlikely.

Immediate Medical Attention

Obtain emergency medical attention.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

All extinguishing agents can be used. Foam. Dry powder. Carbon dioxide. Water spray. Sand.

Unsuitable media

Not specifically applicable. Do not use a heavy water stream.

Specific hazards

Fire hazard: Not flammable. Explosion hazard: No direct explosion hazard.

Instructions

Exercise caution when fighting any chemical fire. Prevent fire fighting water from entering the environment. Use water spray or fog for cooling exposed containers.

Firefighter Protection

Do not enter fire area without proper protective equipment, including respiratory protection.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Evacuate unnecessary personnel. Ventilate area.

Environmental

Avoid release to the environment.

Cleanup methods

Take up mechanically (sweeping, shovelling) and collect in suitable container for disposal. On land, sweep or shovel into suitable containers.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid dust formation. Use personal protective equipment as required. Avoid contact with skin, eyes and clothing. Do not breathe dust. Do not subject to grinding, shock, friction. Floors, walls and other surfaces in the hazard area must be cleaned regularly. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.

Storage

Store in original container. Store away from heat. Keep only in the original container in a cool, well ventilated place away from : Keep container closed when not in use.

Hygiene

Do not eat, drink or smoke when using this product. Wash contaminated clothing before reuse. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.

Fire prevention

No flames, no sparks. Eliminate all sources of ignition.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide adequate ventilation to minimize dust and/or vapour concentrations.

Hands

protective gloves. Wear protective gloves.

Eyes

Safety glasses.

Respiratory

Dust formation: dust mask. In case of insufficient ventilation, wear suitable respiratory equipment. Where exposure through inhalation may occur from use, respiratory protection equipment is recommended. Wear appropriate mask. Effective dust mask

Skin/Body

Wear suitable protective clothing

Environmental

Avoid release to the environment.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Solid
Physical State Data
solid
State Under Standard Conditions
---
Appearance
Powder.
Colour
Beige.
Colour Intensity
---
Form
Powder.
Odor
characteristic.
Odor Threshold
(No data available specific to the product)
Ph
Not applicable
Melting Point
80 – 90 °C
Boiling Point
No data available
Flash Point
> 315 °C
Freezing Point
No data available
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
Not applicable
Evaporation Rate
Not applicable
Vapor Pressure
No data available
Vapor Density
---
Relative Density
No data available
Bulk Density
---
Density
1.575 g/cm³
Flammability
No data available
Upper Explosive Limit
No data available
Lower Explosive Limit
No data available
Explosive Limits
---
Auto Ignition Temperature
No data available
Decomposition Temperature
≥ 200 °C
Solubility
Water: Not soluble in water, so only minimally biodegradable Organic solvent: Soluble in organic solvents
Partition Coefficient
No data available
Solubility In Water
Not soluble in water
Solubility In Fat
---
Molecular Weight
---
Voc Content
0 %
Metal Corrosion
---
Dynamic Viscosity
No data available
Kinematic Viscosity
No data available
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of use. Risk of explosion if heated under confinement. Not established.

Reactivity

Stable at ambient temperature and under normal conditions of use.

Hazardous reactions

Decomposes on exposure to temperature rise: release of (highly) toxic gases/vapours.

Avoid

Heat. Refer to Section 10 on Incompatible Materials.

Incompatible

Strong acids, strong bases and strong oxidants. Strong acids. Strong bases.

Decomposition

Carbon monoxide. Carbon dioxide. Hydrochloric acid fumes may be generated. Nitrous fumes. fume.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Dispose in a safe manner in accordance with local/national regulations.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
Not applicable
Shipping Name
Not applicable
Transport Class
Not applicable
Packing Group
Not applicable
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Not performed

No additional information available

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Holcobatch Beige 93-10-23582?

The signal word is no signal word.

What is the physical form of Holcobatch Beige 93-10-23582?

Holcobatch Beige 93-10-23582 is a solid appearing as powder. with beige. color. It has characteristic. odor.

What is the solubility of Holcobatch Beige 93-10-23582?

Water: Not soluble in water, so only minimally biodegradable Organic solvent: Soluble in organic solvents

What is Holcobatch Beige 93-10-23582 used for?

Industrial use, Additives, Colouring agents

What is the melting point of Holcobatch Beige 93-10-23582?

The melting point is 80 – 90 °C and the boiling point is No data available.