Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BAEROLUB FTO
Regulatory Identifiers
- CAS Number
- N/A
- EC Number
- 203-366-1 Check regulations →
- REACH No.
- 01-2119542189-XXXX
Identified Uses
Manufacture of plastics products, Polymer additive, Lubricant and release agent
Manufacturers & Suppliers
Baerlocher GmbH
manufacturer
Freisinger Strasse 1, 85716 Unterschleissheim - Germany
+49-89/14373-0
Emergency Contacts
Emergency Contact
+44(0)1235 239670
0 - 24 h
Emergency Contact
+49-591/9132-0
0 - 24 h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Hydroxy-fatty acid mixture
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydroxy-fatty acid mixture | --- | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air.
Wash off with soap and water.
Rinse immediately with plenty of water for at least 15 minutes. If eye irritation persists, consult a specialist.
Clean mouth with water and drink afterwards plenty of water. Consult a doctor and show this safety datasheet.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, Foam, Carbon dioxide (CO2), Dry chemical
High volume water jet
Smoke and fumes, toxic.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not flush into surface water or sanitary sewer system. Avoid subsoil penetration.
Use mechanical handling equipment.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid dust formation. In case of thermal processing, provide for extraction of the vapours or adequate ventilation. Keep away from open flames, hot surfaces and sources of ignition. Take precautionary measures against static discharges. Avoid formation and build up of dust. Risk of dust explosion.
Store at room temperature in the original container. Keep in a dry place.
Keep away from open flames, hot surfaces and sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Local exhaust
Protective gloves
Safety glasses
Half mask with a particle filter P2 (EN 143). Necessary, in case of dust formation.
Long sleeved clothing
Do not flush into surface water or sanitary sewer system. Avoid subsoil penetration.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if stored normally.
Stable at normal ambient temperature and pressure.
Risk of dust explosion. The product is combustible.
None known.
None known, if used for its intended application.
No dangerous reaction known under conditions of normal use.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Take to an established disposal company according to the waste regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
According to Regulation 5 of the CHIPS Regulations 1994, the product is not classified as dangerous for supply.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BAEROLUB FTO?
The signal word is no signal word.
What is the physical form of BAEROLUB FTO?
BAEROLUB FTO is a powder appearing as powder with off-white color. It has faint characteristic odour odor.
What is BAEROLUB FTO used for?
Manufacture of plastics products, Polymer additive, Lubricant and release agent
What is the melting point of BAEROLUB FTO?
The melting point is 71 - 80 °C .