Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BAEROLUB L-KO X IN PULVER
- Product Form
- powder
Regulatory Identifiers
- CAS Number
- N/A
- EC Number
- 232-315-6 Check regulations →
- REACH No.
- 01-2119488076-30-xxxx
Identified Uses
Manufacture of plastics products Polymer additive Lubricant and release agent
Manufacturers & Suppliers
Baerlocher GmbH
manufacturer
Freisinger Strasse 1, 85716 Unterschleissheim - Germany
+49-89/14373-0
Emergency Contacts
Emergency Contact
+44(0)1235 239670
0 - 24 h
Emergency Contact
+49-591/9132-0
0 - 24 h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Chemical nature : Synthetic hard wax.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Synthetic hard wax. | --- | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. Move to fresh air in case of accidental inhalation of vapours or decomposition products.
Cool melted product on skin with plenty of water.
Rinse opened eye for several minutes under running water.
Clean mouth with water and drink afterwards plenty of water.
Immediate Medical Attention
In case of burns by molten product medical treatment is necessary. Consult a doctor and show this safety datasheet.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
water spray, Foam, Carbon dioxide (CO2), Dry powder
Smoke and fumes, toxic.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid dust formation.
Do not flush into surface water or sanitary sewer system. Avoid subsoil penetration. Should not be released into the environment.
Use mechanical handling equipment.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid formation and buildup of dust.
Store at room temperature in the original container. Keep in a dry place.
Normal measures for preventive fire protection. Keep away from sources of ignition - No smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Local exhaust. In case of thermal processing, provide for extraction of the vapours or adequate ventilation.
Take note of the information given by the producer concerning permeability and break through times, and of special workplace conditions (mechanical strain, duration of contact). Nitrile rubber. Break through time: > 480 min. Glove thickness: 0,1 mm. Protective gloves against thermal risks
Safety glasses
Half mask with a particle filter P2 (EN 143). Necessary, in case of dust formation. In case of thermal processing, provide for extraction of the vapours or adequate ventilation. Do not breathe vapours from heated product. Should vapours inadvertently manage to permeate into the surrounding air during thermal processing, then gas masks fitted with filters designed to combat organic vapours (e.g. A 2) or breathing apparatus with an independent air supply are to be worn. In case of insufficient ventilation, wear suitable respiratory equipment.
Long sleeved clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal ambient temperature and pressure.
Stable at normal ambient temperature and pressure.
The product is combustible. Risk of dust explosion.
Avoid dust formation. Keep away from heat and sources of ignition.
None known.
carbon monoxide, carbon dioxide, organic products of decomposition.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
The product is not classified for acute or chronic aquatic toxicity based on available test data.
12.2 Persistence and degradability
12.3 Bioaccumulative potential
No data available
12.4 Mobility in soil
The mobility of the product was assessed using QSAR, predicting distribution to air, sediment, and soil.
12.5 Results of PBT and vPvB assessment
Based on available data, the classification criteria are not met.
12.6 Other adverse effects
The product is a water-insoluble, solid polymer and is not expected to have a detrimental effect on the environment.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
With respect to local regulations, e. g. dispose of the suitable waste incineration plant.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
See this safety data sheet chapter 6. - 8.
See this safety data sheet chapter 6. - 8.
See this safety data sheet chapter 6. - 8.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
According to Regulation 5 of the CHIPS Regulations 1994, the product is not classified as dangerous for supply. Relevant: Directive 1999/92/EC, 94/9/EC, 98/24/EC. Non-relevant: Regulation (EC) No. 2037/2000, (EC) No. 850/2004 with amending Directive 79/117/EEC, (EC) No. 689/2008.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BAEROLUB L-KO X IN PULVER?
The signal word is no signal word.
What is the physical form of BAEROLUB L-KO X IN PULVER?
BAEROLUB L-KO X IN PULVER is a solid appearing as powder with white color. It has slight odor.
What is BAEROLUB L-KO X IN PULVER used for?
Manufacture of plastics products Polymer additive Lubricant and release agent
What is the melting point of BAEROLUB L-KO X IN PULVER?
The melting point is 114 - 120 °C and the boiling point is Not applicable.