Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 2-26
- Product Form
- Aerosol
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricants
Manufacturers & Suppliers
CRC Industries Europe bvba
manufacturer
Touwslagerstraat 1, 9240 Zele, Belgium
+32(0)52/45.60.11
CRC Industries Finland Oy
distributor
Asemanrinne 13, 08500 Lohja as.
00358/(19)32.921
CRC Industries France
distributor
ZI du Val d'Argent B.P.90028, 12, Bld des Martyrs de Chateaubriant, 95102 Argenteuil Cedex
01.34.11.20.00
CRC Industries Deutschland GmbH
distributor
Südring 9, D-76473 Iffezheim
(07229) 303.0
CRC INDUSTRIES IBERIA S.L.U.
distributor
GREMIO DEL CUERO-PARC.96, POLIGONO INDUSTR. DE HONTORIA, 40195 SEGOVIA
0034/921.427.546
CRC Industries Sweden
distributor
Kryptongatan 14, 431 53 Mölndal
0046/31 706 84 80
Emergency Contacts
CRC Industries Europe, Belgium
+32(0)52/45.60.11
office hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons, C11-C14, n-alkanes, isoalkanes, cyclics, < 2% aromatics EC: 926-141-6 | --- | 50 - 75% | Yes |
| mineral oil (IP 346 DMSO extract < 3%) | --- | 10 - 25% | No |
| carbon dioxide EC: 204-696-9 | 124-38-9 | 1 - 5% | Yes |
| (2-methoxymethylethoxy)propanol EC: 252-104-2 | 34590-94-8 | 1 - 5% | No |
| sulfonic acids,petroleum,sodium salts EC: 271-781-5 | 68608-26-4 | 1 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Fresh air, keep warm and at rest. Seek medical attention if ill effects occur
Symptoms: nausea, headaches and dizziness
Wash with water and soap. Seek medical attention if irritation persists
Symptoms: redness and pain
If substance has got into eyes, immediately wash out with plenty of water. Seek medical attention if irritation persists
Symptoms: redness and pain
Ingestion is unlikely to occur. If swallowed do not induce vomiting because of risk of aspiration into the lungs. If aspiration is suspected obtain immediate medical attention
Symptoms: sore throat, abdominal pain, nausea, vomiting
Immediate Medical Attention
If aspiration is suspected obtain immediate medical attention
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
foam, carbon dioxide or dry agent
Aerosols may explode if heated above 50°C
Keep container(s) exposed to fire cool, by spraying with water
Firefighter Protection
In case of fire, do not breathe fumes
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow to enter public sewers and watercourses
Absorb spillage
Materials: suitable inert material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from heat and sources of ignition. Take precautionary measures against static discharges. Do not breathe aerosols or vapours. Avoid contact with skin and eyes. Wash thoroughly after use. Wear protective gloves/protective clothing/eye protection/face protection.
Pressurized container: protect from sunlight and do not expose to temperatures exceeding 50°C. Keep out of reach of children.
Wash thoroughly after use.
Keep away from heat and sources of ignition. Take precautionary measures against static discharges. Equipment should be earthed. Use only non-sparking tools.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation. Keep away from heat and sources of ignition. Take precautionary measures against static discharges
Wear suitable protective gloves against chemicals (nitrile)
Wear safety goggles.
In case of insufficient ventilation, wear suitable respiratory equipment. Air purifying respirator equipped with organic gas/vapor cartridge (type A or AX)
Wear suitable protective gloves against chemicals (nitrile)
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable
No hazardous reactions known if used for its intended purpose
No hazardous reactions known if used for its intended purpose
Avoid overheating
Strong oxidising agent
CO,CO2
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
This material and its container must be disposed of in a safe way. Do not discharge into drains or the environment, dispose to an authorised waste collection point.
This material and its container must be disposed of in a safe way. Do not discharge into drains or the environment, dispose to an authorised waste collection point.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
- Packing Group
- Not applicable.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The Safety Data Sheet is compiled according to the current European requirements.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 2-26?
The signal word is na: r-phrases.
What is the physical form of 2-26?
2-26 is a co2 propelled liquid appearing as co2 propelled liquid with amber color. It has salicylate odor.
What is 2-26 used for?
Lubricants