Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- PARMETOL DF 35
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Preservative
Manufacturers & Suppliers
Schülke & Mayr GmbH
manufacturer
Robert-Koch-Str. 2, 22851 Norderstedt, Germany
+4940521000
http://www.schuelke.com
Emergency Contacts
Emergency Contact
+49 (0)40 / 52 100 -0
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Aqueous solution
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Mixture of 5-chloro-2-methyl-2H-isothiazol-3-one (CAS 26172-55-4) and 2-methyl-2H-isothiazol-3-one (CAS 2682-20-4) | 55965-84-9 | 0.6 - 0.8% | Yes |
| (Ethylenedioxy)dime thanol EC: 222-720-6 | 3586-55-8 | 30 - 50% | Yes |
Notes
For the full text of the R-phrases mentioned in this Section, see Section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
If symptoms persist, call a physician.
Wash off immediately with plenty of water.
In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Do NOT induce vomiting. Rinse mouth with water. Give small amounts of water to drink. Obtain medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water, Dry powder, Foam, Carbon dioxide (CO2)
No information available.
Decomposition products, see chapter 10
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not flush into surface water or sanitary sewer system. Avoid subsoil penetration.
Wipe up with absorbent material (e.g. cloth, fleece). Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).
Materials: cloth, fleece, sand, silica gel, acid binder, universal binder, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only in well-ventilated areas. Handle and open container with care.
Store in original container. Keep away from heat. Keep away from direct sunlight. Keep container tightly closed. Limited stability - see label on pack
No special protective measures against fire required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Hand protection : Impervious gloves. Splash protection: disposable nitrile rubber gloves e.g. Dermatril made by KCL or gloves from other manufacturers offering the same protection. Prolonged contact: Butyl rubber gloves e.g. Butoject (>480 Min.) made by KCL or gloves from other manufacturers offering the same protection.
Tightly fitting safety goggles
Take off all contaminated clothing immediately.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
None reasonably foreseeable.
formaldehyde
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of as special waste in compliance with local and national regulations. Can be disposed of as a solid waste or burned in a suitable installation subject to local regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1760
- Shipping Name
- CORROSIVE LIQUID, N.O.S. (5-Chloro-2-methyl-2H-isothiazol-3-one, 2-Methyl-2H-isothiazol-3-one)
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The product belongs to at least one of the categories 1 through 11 mentioned in Annex 1 of the Directive 1996/82/EC concerning the control of major accident hazards.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for PARMETOL DF 35?
The signal word is na: r-phrases.
What is the physical form of PARMETOL DF 35?
PARMETOL DF 35 is a liquid appearing as liquid, colourless - light yellow with colourless - light yellow color. It has aldehyde like odor.
What is PARMETOL DF 35 used for?
Preservative