NextSDS Logo
Safety Data Sheet EN

Carbopol® EZ 2

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Carbopol® EZ 2
Product Code
63812

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Home care

Manufacturers & Suppliers

Interlabshop B.V. logo

Interlabshop B.V.

distributor

Lage Brink 23, 7317 BD Apeldoorn The Netherlands

+3155-5215016

http://www.Labshop.nl

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

2-Polyacrylic acid, self-dispersing

Chemical Name CAS Number Concentration Hazardous
2-Polyacrylic acid, self-dispersing --- --- No

Additional information:

Notes

Information on Components / Hazardous Ingredients

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. If required give artificial respiration. Keep patient warm. Give artificial respiration in case breathing is not regular or if it has stopped. If breathing is difficult call a physician.

Skin contact

Wash with soap and rinse with plenty of water. If irritation continues consult a physician. Wash contaminated clothing before reuse.

Eye contact

Immediately flush eyes with plenty of 1% physiological saline for 5 minutes while holding eyelids open: see a physician. If no saline is available, flush with plenty of clean water for 15 minutes. See physician. Water (moisture) swells this product into a gelatinous film which may be difficult to remove from the eye using only water.

Ingestion

If symptoms persist consult physician.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Foam, carbon dioxide (CO2), extinguishing powder, water spray, water mist. CO2 may be ineffective on larger fires due to a lack of cooling capacity which may result in reignition.

Unsuitable media

None known.

Specific hazards

Product may cause an explosive mixture of organic dust and air.

Firefighter Protection

Wear self-contained respiratory protective device and full protective gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Avoid formation of dust, wear protective clothing. Together with water product causes slippery surfaces.

Environmental

Prevent contamination of soil, drains and surface waters.

Cleanup methods

Clean up mechanically. Clean polluted are with water or other cleaning fluids.

Materials: water or other cleaning fluids

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Do not eat or drink during work. Do not smoke. Do not swallow or inhale. Avoid contact with eyes and skin.

Storage

Store in tightly sealed containers in a dry and cool room. Store containers in a well ventilated location.

Hygiene

Take off contaminated clothing immediately and reuse only after thoroughly cleaning these.

Fire prevention

Keep away from sources of ignition - do not smoke. Take measures to prevent electrostatic discharge. Ground and bond containers when transferring material.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Use appropriate local exhaust ventilation to control airborne levels.

Hands

Chemical protective gloves (EN 374 (Europe), F739 (US)).

Eyes

Safety glasses with protective shields (EN 166).

Respiratory

A respiratory protection program meeting OSHA 1910.134 and ANSI Z88.2 requirements must be followed whenever workplace conditions warrant a respirator's use.

Skin/Body

Protective suit with long sleeves.

Environmental

No special measures required.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Voc Content
---
Density
1.4 g/cm3 (20°C)
Ph
2.5 - 3 (1 % H2O)
Relative Evaporation Rate
---
Boiling Point
not determined
Freezing Point
---
Colour
white
Solubility
---
Dynamic Viscosity
not applicable
Appearance
---
Molecular Weight
---
Explosive Limits
---
Melting Point
not determined
Flash Point
not applicable
Relative Density
---
Auto Ignition Temperature
ca. 480°C
Decomposition Temperature
No data available.
Physical State
powder
Softening Point
---
Solubility In Fat
---
Properties Status
---
Cloud Point
---
Kinematic Viscosity
---
Vapor Pressure
not determined
State Under Standard Conditions
---
Partition Coefficient
not determined
Form
powder
Metal Corrosion
---
Vapor Density
No information available.
Colour Intensity
---
Solidification Point
---
Evaporation Rate
No information available.
Bulk Density
0.215 g/ml (25°C)
Crystallisation Point
---
Odor Threshold
No information available.
Lower Explosive Limit
no information available
Physical State Data
solid
Flammability
not flammable
Odor
slight acetic
Solubility In Water
will swell in water
Upper Explosive Limit
no information available
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at room temperature.

Reactivity

Stable if used according to specifications.

Hazardous reactions

None if handled and stored according to specifications.

Avoid

Avoid humidity. Avoid contact with heat and static discharge.

Incompatible

Strong basic products such as ammonium, sodium hydroxide or strong basic amines (heat development).

Decomposition

In case of fire: formation of carbon monoxide, carbon dioxide and fumes.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Dispose of according to official national and local regulations.

Disposal

Dispose of according to official national and local regulations.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

Packing Group
not applicable
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Carbopol® EZ 2?

The signal word is no signal word.

What is the physical form of Carbopol® EZ 2?

Carbopol® EZ 2 is a powder with white color. It has slight acetic odor.

What is Carbopol® EZ 2 used for?

Home care

What is the melting point of Carbopol® EZ 2?

The melting point is not determined and the boiling point is not determined.