Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TROMBONE SLIDE OIL 3
- Product Code
- VCK5470
- Synonyms
- TRB SLIDE LUBRICANT 30ML//03
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
No further relevant information available
Manufacturers & Suppliers
YAMAHA CORPORATION
manufacturer
10-1 Nakazawa-cho, Naka-ku, Hamamatsu 430-8650, Japan
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Silicone oil Ethylene glycol Fatty acid salts Ｓｕｒｆａｃｔａｎｔｓ Anti-corrosive Agent Water
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Silicone oil | --- | --- | No |
| Ethylene glycol | --- | --- | No |
| Fatty acid salts | --- | --- | No |
| Surfactants | --- | --- | No |
| Anti-corrosive Agent | --- | --- | No |
| Water | --- | --- | No |
UN Class.: Not applicable UN No.: Not applicable
First Aid Measures
Emergency procedures for chemical exposure incidents
Wash contaminated area thoroughly with soap and water. If any rash appears on skin after contact with this product, consult a doctor immediately.
Symptoms: rash
Immediately flush eyes with large amounts of water and consult a doctor.
IF SWALLOWED immediately call a POISON CENTER or doctor/physician. Do not induce vomiting and consult a doctor immediately.
Immediate Medical Attention
Consult a doctor immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use dry chemical, foam, or carbon dioxide.
Water may be ineffective but can be used to cool containers exposed to heat or flame.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Notify appropriate authorities of spill. Contain spill immediately. Do not allow spill to enter sewers or watercourses. Remove all sources of ignition. Absorb with appropriate inert material such as sand, clay, etc.
Do not allow spill to enter sewers or watercourses.
Absorb with appropriate inert material
Materials: sand, clay, etc.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not transfer to unmarked containers.
Store locked up. Store in closed containers away from heat, sparks, open flame, or oxidizing materials.
Store away from heat, sparks, open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ventilation is not required under conditions of normal use.
For prolonged or repeated exposures, use impervious clothing (boots, gloves, aprons, etc.) over parts of the body subject to exposure.
Eye protection is not required under conditions of normal use. If material is handled such that it could be splashed into eyes, wear plastic face shield or splash proof safety goggles.
Respiratory protection is not required under conditions of normal use.
No skin protection is required for short duration exposures. For prolonged or repeated exposures, use impervious clothing (boots, gloves, aprons, etc.) over parts of the body subject to exposure.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Will not occur.
May react with strong oxidizing agents.
Will not occur.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of contents/container to in accordance with local/regional/national/international regulation.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is TROMBONE SLIDE OIL 3 known by?
TROMBONE SLIDE OIL 3 is also known as: TRB SLIDE LUBRICANT 30ML//03
What is the hazard signal word for TROMBONE SLIDE OIL 3?
The signal word is warning.
What is the physical form of TROMBONE SLIDE OIL 3?
TROMBONE SLIDE OIL 3 is a milk-white gel appearing as milk-white gel with milk-white color. It has perfume odour odor.
What is the solubility of TROMBONE SLIDE OIL 3?
No data
What is TROMBONE SLIDE OIL 3 used for?
No further relevant information available
What are the hazard statements for TROMBONE SLIDE OIL 3?
This substance has 2 hazard statements:
- H372: May cause damage to organs Central nervous system, Respiratory organs, Heart, Kidneys.
- H373: May cause damage to organs through prolonged or repeated exposure Central nervous system, Respiratory organs, Heart.
What is the melting point of TROMBONE SLIDE OIL 3?
The melting point is No data and the boiling point is No data.