Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- FLAMMADUR® A 77 HF
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Coating material
Manufacturers & Suppliers
AIK Flammadur Brandschutz GmbH
manufacturer
Otto-Hahn-Str. 5, D-34123 Kassel
++49-(0)561-5801-0
http://aik-flammadur.de
Emergency Contacts
GBK GmbH
+49 - (0) 6132 - 84463
24h - 7d/w - 365d/a
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture containing following substances with additives
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| triethyl phosphate EC: 201-114-5 | 78-40-0 | 5 - 10% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Take affected person into fresh air. Consult a physician.
In case of contact with skin wash off immediately with plenty of water.
Do not rub eyes. Rinse thoroughly with plenty of water, also under the eyelids. If eye irritation persists, consult a specialist.
Symptoms: contains inorganic fillers, which irritate the eyes mechanically like other inert materials.
Never give anything by mouth to an unconscious person. Do not induce vomiting. Rinse out mouth and give plenty of water to drink. Consult a physician.
Medical Treatment
Treat symptoms.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, carbon dioxide (CO2), dry chemical, water-spray
carbon monoxide and carbon dioxide
Firefighter Protection
In case of fire, wear suitable respiratory equipment with positive air supply.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid contact with eyes, skin or mucous membrane.
Do not discharge large amounts into the drains or bodies of water.
Soak up with inert absorbent material
Materials: sand, silica gel, acid binder, universal binder
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Take the usual precautions when handling with chemicals.
Keep container tightly closed in a dry, cool and well-ventilated place. Keep from freezing. Protect from heat and direct solar radiation.
Take the usual precautions when handling with chemicals.
No special precautions required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide appropriate exhaust ventilation at machinery and at places where dust can be generated.
Chemical-resistant gloves (EN 374) Safety gloves for the site (EN420, Cat. 1 or 2). Follow the recommendations of the glove manufacturer for breakthrough properties especially for workplace conditions involving mechanical stress and contact duration.
During transferring safety goggles are recommended. Tightly fitting goggles (EN 166).
Not required under normal use.
Protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No data available
None under normal processing.
To avoid thermal decomposition, do not overheat. Keep from freezing.
Strong oxidizing agents. Strong acids. Strong bases.
No decomposition if stored and applied as directed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Do not discharge into the drains/surface waters/ground water. The waste code number must be agreed with the disposer / manufacturer / competent authority.
Waste disposal according to local regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for FLAMMADUR® A 77 HF?
The signal word is no signal word.
What is the physical form of FLAMMADUR® A 77 HF?
FLAMMADUR® A 77 HF is a pasty with according to product specification color. It has characteristic odor.
What is FLAMMADUR® A 77 HF used for?
Coating material
What is the melting point of FLAMMADUR® A 77 HF?
The melting point is Not determined and the boiling point is 100 °C.