Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MOTIP COPPER PASTE 200 ML
- Product Code
- 090313
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
SU21 Consumer uses: Private households / general public / consumers; SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen); Product category Other coatings and paints; Process category PROC7 Industrial spraying; PROC11 Non industrial spraying; Application of the substance / the mixture Lubricant
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
European Aerosols B.V.
manufacturer
Wolframweg 2, NL-8471 XC Wolvega, The Netherlands
+31 (0)561 694400
Emergency Contacts
Emergency Contact
+31 (0)561-694400
09:00h - 17:00h
NPIS National Poisons Information Centre
+44 0344 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| copper EC: 231-159-6 | 7440-50-8 | 5 - 10% | Yes |
For the wording of the listed hazard phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Rinse opened eye for several minutes under running water.
Drink plenty of water and provide fresh air. Call for a doctor immediately.
Immediate Medical Attention
Call for a doctor immediately.
Medical Treatment
No further relevant information available.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
No further relevant information available.
Firefighter Protection
No special measures required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
Inform respective authorities in case of seepage into water course or sewage system. Do not allow to enter sewers/ surface or ground water.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No special measures required.
Keep container tightly sealed. Observe official regulations on storing packagings with pressurised containers.
Keep ignition sources away - Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see section 7.
Not required. Material of gloves: Not required. Penetration time of glove material: Not required.
Not required.
Filter A2/P3
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
No further relevant information available.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed together with household garbage.
Must not be disposed together with household garbage.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2
- Packing Group
- not regulated
Warning: Gases.
Warning: Gases.
Warning: Gases.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Safety, health and environmental regulations/legislation specific for the substance or mixture Poisons Act
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MOTIP COPPER PASTE 200 ML?
The signal word is warning.
What is the physical form of MOTIP COPPER PASTE 200 ML?
MOTIP COPPER PASTE 200 ML is a aerosol appearing as brown with brown color. It has characteristic odor.
What is MOTIP COPPER PASTE 200 ML used for?
SU21 Consumer uses: Private households / general public / consumers; SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen); Product category Other coatings and paints; Process category PROC7 Industrial spraying; PROC11 Non industrial spraying; Application of the substance / the mixture Lubricant
What are the hazard statements for MOTIP COPPER PASTE 200 ML?
This substance has 2 hazard statements:
- H229: Pressurised container: May burst if heated.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of MOTIP COPPER PASTE 200 ML?
The melting point is Undetermined. and the boiling point is Not applicable, as aerosol..