Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Copper Paste
- Product Form
- Aerosol
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricants
Manufacturers & Suppliers
CRC Industries Europe bvba
manufacturer
Touwslagerstraat 1, 9240 Zele, Belgium
+32(0)52/45.60.11
CRC Industries Finland Oy
distributor
Laurinkatu 57 A 23 B, 08100 Lohja
+358/(19)32.921
CRC Industries France
distributor
6, avenue du marais, C.S. 90028, 95102 Argenteuil Cedex
01.34.11.20.00
CRC Industries Deutschland GmbH
distributor
Südring 9, D-76473 Iffezheim
(07229) 303.0
CRC INDUSTRIES IBERIA S.L.U.
distributor
GREMIO DEL CUERO-PARC.96, POLIGONO INDUSTR. DE HONTORIA, 40195 SEGOVIA
0034/921.427.546
CRC Industries Sweden
distributor
Kryptongatan 14, 431 53 Mölndal
0046/31 706 84 80
Emergency Contacts
CRC Industries Europe
+32(0)52/45.60.11
office hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons,C3-4-rich, petroleum distillate Petroleumgas (1,3-butadiene < 0.1%) EC: 270-990-9 | 68512-91-4 | 50 - 75% | Yes |
| Naphtha (petroleum), hydrotreated light EC: 921-024-6 | 64742-49-0 | 25% | Yes |
| mineral oil (IP 346 DMSO extract < 3%) | --- | 10 - 25% | No |
| Copper EC: 231-159-6 | 7440-50-8 | 1 - 5% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor/physician if you feel unwell.
Symptoms: Excessive inhalation of solvent vapours may give rise to nausea, headaches and dizziness
Take off contaminated clothing and wash before reuse. IF ON SKIN: Wash with plenty of soap and water. If skin irritation occurs: Get medical advice/attention.
Symptoms: Irritating to skin Symptoms : redness and pain
If substance has got into eyes, immediately wash out with plenty of water. If eye irritation persists: Get medical advice/attention.
Symptoms: May cause irritation. Symptoms : redness and pain
If swallowed do not induce vomiting because of risk of aspiration into the lungs. If aspiration is suspected obtain immediate medical attention.
Symptoms: After vomiting of swallowed product aspiration into lungs is likely. Solvents may induce chemical pneumonia. Symptoms : sore throat, abdominal pain, nausea, vomiting
Immediate Medical Attention
If eye irritation persists: Get medical advice/attention. If skin irritation occurs: Get medical advice/attention. Call a POISON CENTER or doctor/physician if you feel unwell. If aspiration is suspected obtain immediate medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
foam, carbon dioxide or dry agent
Aerosols may explode if heated above 50°C
Keep container(s) exposed to fire cool, by spraying with water
Firefighter Protection
In case of fire, do not breathe fumes
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow to enter public sewers and watercourses
Absorb spillage in suitable inert material
Materials: suitable inert material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes. Wear protective gloves/protective clothing/eye protection/face protection.
Pressurized container : protect from sunlight and do not expose to temperatures exceeding 50°C. Keep out of reach of children.
Wash thoroughly after use.
Keep away from heat and sources of ignition. Take precautionary measures against static discharges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, Keep away from heat and sources of ignition, Take precautionary measures against static discharges
Wear suitable protective gloves against chemicals (nitrile)
Wear safety goggles.
In case of insufficient ventilation, wear suitable respiratory equipment. Air purifying respirator equipped with organic gas/vapor cartridge (type A or AX)
Wear suitable protective gloves against chemicals (nitrile)
Avoid release to the environment. Collect spillage.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable
No hazardous reactions known if used for its intended purpose
No hazardous reactions known if used for its intended purpose
Avoid overheating
Strong oxidising agent
CO,CO2
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
- Packing Group
- Not applicable.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Copper Paste?
The signal word is danger.
What is the physical form of Copper Paste?
Copper Paste is a propane/butane propelled liquid. appearing as propane/butane propelled liquid. with copper. color.
What is Copper Paste used for?
Lubricants
What are the hazard statements for Copper Paste?
This substance has 5 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H315: Causes skin irritation.
- H336: May cause drowsiness or dizziness.
- H412: Harmful to aquatic life with long lasting effects.