Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Lithium phenyl-2,4,6-trimethylbenzoylphosphinate, ≥95% purity
- Product Code
- 900889
- Chemical Name
- Lithium phenyl-2,4,6-trimethylbenzoylphosphinate
Regulatory Identifiers
- CAS Number
- 85073-19-4 Check regulations →
- EC Number
- 177-553-0 Check regulations →
Identified Uses
Laboratory chemicals, Synthesis of substances
Uses advised against
The product is being supplied under the TSCA R&D Exemption (40 CFR Section 720.36). It is the recipient’s responsibility to comply with the requirements of the R&D exemption. The product may not be used for a non-exempt commercial purpose under TSCA unless appropriate consent is granted in writing by MilliporeSigma.
Manufacturers & Suppliers
Sigma-Aldrich Inc.
3050 SPRUCE ST ST. LOUIS MO 63103 UNITED STATES
+1 314 771-5765
Emergency Contacts
CHEMTREC
800-424-9300
24 Hours/day; 7 Days/week
CHEMTREC
+1-703-527-3887
24 Hours/day; 7 Days/week
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
After inhalation: fresh air.
In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower.
After eye contact: rinse out with plenty of water. Remove contact lenses.
After swallowing: make victim drink water (two glasses at most). Consult doctor if feeling unwell.
Medical Treatment
No data available
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water Foam Carbon dioxide (CO2) Dry powder
For this substance/mixture no limitations of extinguishing agents are given.
Combustible. Development of hazardous combustion gases or vapours possible in the event of fire.
No data available for specific extinguishing methods. Suppress (knock down) gases/vapours/mists with a water spray jet.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate the danger area, observe emergency procedures, consult an expert.
Do not let product enter drains.
Collect, bind, and pump off spills. Take up dry. Clean up affected area.
Related Products
Similar products with comparable safety profiles
Lithium acetate, 99%
CAS: 6108-17-4
Lithium ICP Standard traceable to SRM from NIST LiNO in HNO 2 3% 1000 mg/l Li CertiPUR
---
Lithium carbonate, Puratronic®
CAS: 554-13-2
Lithium chloride, anhydrous
CAS: 7447-41-8
Lithium nitrate, anhydrous
CAS: 7790-69-4
Lithium
CAS: 7439-93-2
Lithium tetraborate 35,3% / Lithium metaborate 64,7%
---
Lithium carbonate for analysis EMSURE® ACS,Reag. Ph Eur
CAS: 554-13-2
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Tightly closed. Dry.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No data available
Material: Nitrile rubber; Break through time: 480 min; Glove thickness: 0.11 mm; Protective index: Full contact; Manufacturer: KCL 741 Dermatril® L. Material: Nitrile rubber; Break through time: 480 min; Glove thickness: 0.11 mm; Protective index: Splash contact; Manufacturer: KCL 741 Dermatril® L. Remarks: Handle with impervious gloves. This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN 16523-1 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses
required when dusts are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter type: Filter type P1. The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under standard ambient conditions (room temperature)
The following applies in general to flammable organic substances and mixtures: in correspondingly fine distribution, when whirled up a dust explosion potential may generally be assumed.
No data available
no information available
Strong oxidizing agents
In the event of fire: see section 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Lithium phenyl-2,4,6-trimethylbenzoylphosphinate, ≥95% purity?
The signal word is no signal word.
What is the physical form of Lithium phenyl-2,4,6-trimethylbenzoylphosphinate, ≥95% purity?
Lithium phenyl-2,4,6-trimethylbenzoylphosphinate, ≥95% purity is a solid appearing as solid with no data available color. It has no data available odor.
What is Lithium phenyl-2,4,6-trimethylbenzoylphosphinate, ≥95% purity used for?
Laboratory chemicals, Synthesis of substances
What is the melting point of Lithium phenyl-2,4,6-trimethylbenzoylphosphinate, ≥95% purity?
The melting point is No data available and the boiling point is No data available.