Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Hydroxypropyl acrylate, mixture of isomers
- Product Code
- 370932
- Chemical Name
- Hydroxypropyl acrylate, mixture of isomers
Regulatory Identifiers
- CAS Number
- 25584-83-2 Check regulations →
Identified Uses
Laboratory chemicals, Synthesis of substances
Uses advised against
The product is being supplied under the TSCA R&D Exemption (40 CFR Section 720.36). It is the recipient's responsibility to comply with the requirements of the R&D exemption. The product may not be used for a non-exempt commercial purpose under TSCA unless appropriate consent is granted in writing by MilliporeSigma.
Manufacturers & Suppliers
Sigma-Aldrich Inc.
manufacturer
3050 SPRUCE ST, ST. LOUIS MO 63103, UNITED STATES
+1 314 771-5765
Emergency Contacts
CHEMTREC
800-424-9300
24 Hours/day; 7 Days/week
CHEMTREC
+1-703-527-3887
24 Hours/day; 7 Days/week
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS06
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydroxypropyl acrylate, mixture of isomers EC: 247-118-0 | 25584-83-2 | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon oxides. Combustible.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
No data available
No data available
Materials: No data available
Related Products
Similar products with comparable safety profiles
Hydroxypropyl acrylate, mixture of isomers
CAS: 25584-83-2
Hydroxypropyl acrylate
CAS: 999-61-1
Glycerol monomethacrylate, mixture of isomers
CAS: 5919-74-4
2-Hydroxyethyl acrylate, stabilized
CAS: 818-61-1
Di(propylene glycol) methyl ether acetate, mixture of isomers
CAS: 88917-22-0
2-Hydroxyethyl acrylate
CAS: 818-61-1
Isooctyl acrylate
CAS: 29590-42-9
4-Methyl-1,2-cyclohexanedicarboxylic anhydride, mixture of isomers
CAS: 19438-60-9
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
For precautions see section 2.2.
No data available
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Full contact: Material: Chloroprene, Minimum layer thickness: 0.6 mm, Break through time: 480 min, Material tested: Camapren® (KCL 722 / Aldrich Z677493, Size M). Splash contact: Material: Nitrile rubber, Minimum layer thickness: 0.4 mm, Break through time: 30 min, Material tested: Camatril® (KCL 730 / Aldrich Z677442, Size M). If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the EC approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario.
Prevent product from entering drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No data available
No data available
No data available
No data available
Strong oxidizing agents
In the event of fire: see section 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
No data available
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2922
- Shipping Name
- Corrosive liquids, toxic, n.o.s. (Hydroxypropyl acrylate, mixture of isomers)
- Transport Class
- 8 (6.1)
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Hydroxypropyl acrylate, mixture of isomers?
The signal word is danger.
What is the physical form of Hydroxypropyl acrylate, mixture of isomers?
Hydroxypropyl acrylate, mixture of isomers is a liquid appearing as liquid, colorless with colorless color. It has like acrylic odor.
What is Hydroxypropyl acrylate, mixture of isomers used for?
Laboratory chemicals, Synthesis of substances
What are the hazard statements for Hydroxypropyl acrylate, mixture of isomers?
This substance has 5 hazard statements:
- H301 + H311 + H331: Toxic if swallowed, in contact with skin or if inhaled.
- H314: Causes severe skin burns and eye damage.
- H317: May cause an allergic skin reaction.
- H401: Toxic to aquatic life.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of Hydroxypropyl acrylate, mixture of isomers?
The melting point is -30 °C (-22 °F) and the boiling point is 77 °C 171 °F at 7 hPa.