NextSDS Logo
Safety Data Sheet EN

Arjo Liquids Flusher Detergent

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Arjo Liquids Flusher Detergent

Regulatory Identifiers

CAS Number
N/A
UFI Code
DAU4-K08M-500G-AGPV

Identified Uses

Mild alkaline detergent to be used for automated cleaning of human waste containers. Suitable for use on alkali resistant surfaces such as stainless steel, ceramics, glass and resistant plastics.

Manufacturers & Suppliers

ArjoHuntleigh AB logo

ArjoHuntleigh AB

manufacturer

Hans Michelsensgatan 10 211 20 Malmö, Sweden

+46 (0)10 335 4500

http://www.arjo.com

Emergency Contacts

Emergency Contact

+44 8 08 189 0979

Emergency Contact

+1 760 476 3961

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Corr. Cat. 1
Eye Dam. Cat. 1
Not Classified
Not Classified

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H314 Causes severe skin burns and eye damage.

Precautionary Statements

P280 Wear protective gloves/protective clothing/eye protection/ face protection.
P301 + P330 + P331 IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P363 Wash contaminated clothing before reuse.
P405 Store locked up.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Sodium Hydroxide EC: 215-185-5 1310-73-2 0.5 - 2% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If irritation occurs, remove to fresh air, keep warm and at rest, seek medical attention immediately.

Symptoms: Breathing spray mist will cause irritation.

Skin contact

Remove contaminated clothing, wash skin with soap and water. Seek medical attention immediately. Chemical burns must be treated by a physician. Wash contaminated clothing before reuse.

Symptoms: Causes severe skin damage.

Eye contact

Immediately flush eyes with water, holding eyelids apart, for at least 10 minutes. Seek medical assistance immediately.

Symptoms: Causes serious eye damage.

Ingestion

Do not induce vomiting. If conscious, give water to drink. Seek medical assistance immediately.

Immediate Medical Attention

Seek medical assistance immediately.

Medical Treatment

Chemical burns must be treated by a physician.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use extinguishing media appropriate for primary source of fire

Specific hazards

No specific hazards arising from the mixture. May produce toxic fumes under extreme heating in fire.

Instructions

No special measures arising from the mixture.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Take precautions to avoid contact. Keep the area clear. Observe regulations.

Small spill

Small quantities, mop up or use an inert absorbent.

Large spill

Large quantities, contain and absorb or pump into suitable containers for disposal.

Environmental

Prevent spills from entering water courses

Cleanup methods

mop up or use an inert absorbent; contain and absorb or pump into suitable containers for disposal.

Materials: inert absorbent

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Do not mix with other products. Observe good industrial hygiene.

Storage

Store in a cool, dry place protected from frost and away from acids and strong oxidising agents. Store upright in original containers.

Hygiene

Observe good industrial hygiene.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Wear PVC or latex gloves. Exact choice of glove depends on specific risk assessments.

Eyes

Wear eye protection appropriate to the process according to BS EN 166.

Respiratory

Avoid breathing spray mist, wear a protective mask according to EN149 if necessary.

Skin/Body

As necessary to prevent contact.

Environmental

Prevent mixture from entering water courses.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Ph
12.9 as supplied (typical). pH 9.8 at 2 ml/l (typical)
Voc Content
---
Decomposition Temperature
---
Solubility In Water
Miscible
Form
---
Relative Density
1.078 (typical) at 20 °C
Evaporation Rate
---
Dynamic Viscosity
<20cPs (typical)
Vapor Density
---
State Under Standard Conditions
---
Physical State
Liquid
Molecular Weight
---
Auto Ignition Temperature
Not applicable
Relative Evaporation Rate
---
Physical State Data
liquid
Solubility In Fat
---
Flash Point
---
Upper Explosive Limit
---
Appearance
---
Lower Explosive Limit
---
Vapor Pressure
17.5mm Hg at 20 °C
Cloud Point
---
Odor Threshold
---
Crystallisation Point
---
Softening Point
---
Boiling Point
100 °C
Bulk Density
---
Explosive Limits
---
Freezing Point
---
Melting Point
---
Solidification Point
---
Kinematic Viscosity
---
Odor
Characteristic
Flammability
---
Partition Coefficient
---
Colour Intensity
---
Metal Corrosion
---
Density
---
Colour
Colourless
Solubility
Miscible with water
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Reactivity

Incompatible with oxidising agents, acids and alkali sensitive metals such as aluminium.

Hazardous reactions

No hazardous reactions are expected to occur.

Avoid

Extremes of temperature.

Incompatible

Incompatible with oxidising agents, acids and alkali sensitive metals such as aluminium.

Decomposition

None known.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Empty cleaned containers can be recycled where facilities exist or sent for landfill or incineration where permitted. Dispose of surplus product and packaging via a licensed chemical waste contractor. Process effluent can normally be discharged to foul sewer (subject to consent limits).

Disposal

Dispose of surplus product via a licensed chemical waste contractor.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3266
Shipping Name
Corrosive liquid, basic, inorganic, N.O.S.
Transport Class
8
Packing Group
3
ADR

No specific precautions.

IMDG

No specific precautions.

IATA

No specific precautions.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Contents according to Regulation (EC) No. 648/2004 on detergents: Polycarboxylate: <5 %, Amphoteric surfactants: <5 %. The surfactant(s) contained in this preparation comply with the biodegradability criteria laid down in Regulation (EC) No. 648/2004 on detergents.

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Arjo Liquids Flusher Detergent?

The signal word is danger.

What is the physical form of Arjo Liquids Flusher Detergent?

Arjo Liquids Flusher Detergent is a liquid with colourless color. It has characteristic odor.

What is the solubility of Arjo Liquids Flusher Detergent?

Miscible with water

What is Arjo Liquids Flusher Detergent used for?

Mild alkaline detergent to be used for automated cleaning of human waste containers. Suitable for use on alkali resistant surfaces such as stainless steel, ceramics, glass and resistant plastics.

What are the hazard statements for Arjo Liquids Flusher Detergent?

This substance has 1 hazard statement:

  • H314: Causes severe skin burns and eye damage.