NextSDS Logo
Safety Data Sheet EN

Getinge Clean Flusher Detergent

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Getinge Clean Flusher Detergent
Product Code
XV1519

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Mild alkaline detergent to be used for automated cleaning of human waste containers. Suitable for use on alkali resistant surfaces such as stainless steel, ceramics, glass and resistant plastics.

Manufacturers & Suppliers

Getinge Disinfection AB logo

Getinge Disinfection AB

national supplier

Ljungadalsgatan 11, Box 1505, SE-351 15 Växjö, Sweden

+46 (0)10 335 98 00

www.getinge.com

G

Getinge Australia (NZ Branch)

national supplier

Unit 4, 10 Cryers Road, East Tamaki, Auckland, Botany 2163, New Zealand

+64 9 272 90393

Emergency Contacts

EU

+44 (0) 1235 239 670

Australia

+61 2801 44558

Japan

+81 345 789 341

China

+86 10 5100 3039

Middle East

+44 (0) 1235 239 671

New Zealand

+64 9929 1483

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Eye Dam. Cat. 1
Skin Irrit. Cat. 2
Not Classified
Not Classified

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H315 Causes skin irritation.
H318 Causes serious eye damage.

Precautionary Statements

P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P332 + P313 If skin irritation occurs: Get medical advice/attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P405 Store locked up.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical advice/ attention.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Sodium hydroxide 1310-73-2 0.5 - 2% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

In case of overexposure, remove to fresh air, keep warm and at rest, seek medical assistance immediately.

Symptoms: Breathing spray mist will cause irritation.

Skin contact

Remove contaminated clothing, wash skin with soap and water. Seek medical attention if irritation persists.

Symptoms: Will cause irritation.

Eye contact

Immediately flush eyes with water, holding eyelids apart, for at least 10 minutes. Seek medical assistance immediately.

Symptoms: Will cause severe irritation and damage.

Ingestion

Do not induce vomiting. If conscious, give water to drink. Seek medical assistance immediately.

Immediate Medical Attention

Seek medical assistance immediately.

Medical Treatment

No special treatment or attention required additional to section 4.2.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use extinguishing media appropriate for primary source of fire.

Specific hazards

No specific hazards arising from the mixture. May produce toxic fumes under extreme heating in fire.

Instructions

No special measures arising from the mixture.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Take precautions to avoid contact. Keep the area clear. Observe regulations.

Small spill

Small quantities, mop up or use an inert absorbent.

Large spill

Large quantities, contain and absorb or pump into suitable containers for disposal.

Environmental

Prevent spills from entering water courses.

Cleanup methods

mop up or use an inert absorbent. contain and absorb or pump into suitable containers for disposal.

Materials: inert absorbent

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Do not mix with other products. Observe good industrial hygiene.

Storage

Store in a cool, dry place protected from frost and away from acids and strong oxidising agents. Store upright in original containers. Recommended storage temperature 5-25 °C.

Hygiene

Observe good industrial hygiene.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Wear pvc or latex gloves. Exact choice of glove depends on specific risk assessments.

Eyes

Wear eye protection appropriate to the process according to BS EN 166.

Respiratory

Avoid breathing spray mist, wear a protective mask to EN149 if necessary.

Skin/Body

As necessary to prevent contact.

Environmental

Prevent mixture from entering water courses.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Upper Explosive Limit
---
Relative Evaporation Rate
---
Vapor Pressure
17.5mm Hg at 20 °C
Relative Density
1.078 (typical)
Colour
---
Solubility In Water
---
Freezing Point
---
Odor Threshold
---
Boiling Point
100 °C
Evaporation Rate
---
Form
---
Kinematic Viscosity
3.7 cSt
Lower Explosive Limit
---
Flash Point
---
Partition Coefficient
---
Ph
12.9 as supplied (typical)
Colour Intensity
---
Metal Corrosion
---
Density
---
Bulk Density
---
State Under Standard Conditions
---
Appearance
Clear colourless to pale yellow liquid
Melting Point
---
Decomposition Temperature
---
Dynamic Viscosity
---
Flammability
---
Cloud Point
---
Explosive Limits
---
Auto Ignition Temperature
Not applicable
Molecular Weight
---
Softening Point
---
Solubility
Miscible with water
Vapor Density
---
Physical State Data
liquid
Crystallisation Point
---
Properties Status
---
Solidification Point
---
Physical State
Clear colourless to pale yellow liquid
Solubility In Fat
---
Odor
Characteristic
Voc Content
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Reactivity

Incompatible with oxidising agents, acids and alkali sensitive metals such as aluminium.

Hazardous reactions

No hazardous reactions are expected to occur.

Avoid

Extreme temperatures.

Incompatible

Incompatible with oxidising agents, acids and alkali sensitive metals such as aluminium.

Decomposition

None known.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3266
Shipping Name
Corrosive liquid, basic, inorganic, N.O.S.
Transport Class
8
Packing Group
3
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Getinge Clean Flusher Detergent?

The signal word is danger.

What is the physical form of Getinge Clean Flusher Detergent?

Getinge Clean Flusher Detergent is a clear colourless to pale yellow liquid appearing as clear colourless to pale yellow liquid . It has characteristic odor.

What is the solubility of Getinge Clean Flusher Detergent?

Miscible with water

What is Getinge Clean Flusher Detergent used for?

Mild alkaline detergent to be used for automated cleaning of human waste containers. Suitable for use on alkali resistant surfaces such as stainless steel, ceramics, glass and resistant plastics.

What are the hazard statements for Getinge Clean Flusher Detergent?

This substance has 2 hazard statements:

  • H315: Causes skin irritation.
  • H318: Causes serious eye damage.