Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ISOPROPANOL COSMETIC GRADE
- Chemical Name
- propan-2-ol
Regulatory Identifiers
- CAS Number
- 67-63-0 Check regulations →
- EC Number
- 200-661-7 Check regulations →
- REACH No.
- 01-2119457558-25-xxxx
Identified Uses
Identified use: See table in front of appendix for a complete overview of identified uses.
Uses advised against
At this moment we have not identified any uses advised against
Manufacturers & Suppliers
Brenntag N.V.
distributor
Nijverheidslaan 38, BE 8540 Deerlijk
+32 (0)56 77 6944
Brenntag Nederland B.V.
distributor
Donker Duyvisweg 44, NL 3316 BM Dordrecht
+31 (0)78 65 44 944
Emergency Contacts
Antipoison Center - Brussels
+32(0)70 245 245
National Poisoning Information Center - Bilthoven
+31(0) 88 755 8000
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| propan-2-ol EC: 200-661-7 | 67-63-0 | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. If breathing is irregular or stopped, administer artificial respiration. If unconscious place in recovery position. Consult a physician after significant exposure.
Symptoms: Inhalation of high vapour concentrations may cause symptoms like headache, dizziness, tiredness, nausea and vomiting.
Wash off immediately with soap and plenty of water. If skin irritation persists, call a physician.
Rinse immediately with plenty of water, also under the eyelids, for at least 10 minutes. Consult an eye specialist immediately. Go to an ophthalmic hospital if possible.
Clean mouth with water and drink afterwards plenty of water. Never give anything by mouth to an unconscious person. Do NOT induce vomiting. If vomiting occurs, the head should be kept low so that vomit does not enter the lungs. Call a physician immediately.
Immediate Medical Attention
Consult a physician after significant exposure (inhalation), call a physician immediately (ingestion), consult an eye specialist immediately (eye contact).
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
High volume water jet
The vapour may be invisible, heavier than air and spread along ground. Vapours may form explosive mixtures with air. Flash back possible over considerable distance.
Cool closed containers exposed to fire with water spray. Heating will cause a pressure rise - with risk of bursting.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus. Wear personal protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep away from heat and sources of ignition. Use personal protective equipment. Keep away unprotected persons. Provide adequate ventilation. Avoid contact with skin and eyes. Do not breathe vapours or spray mist.
Do not flush into surface water or sanitary sewer system. Avoid subsoil penetration.
collect with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and place in container for disposal according to local / national regulations
Materials: non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep container tightly closed. Ensure adequate ventilation. Use personal protective equipment. Avoid contact with skin, eyes and clothing. Do not breathe vapours or spray mist. Emergency eye wash fountains and emergency showers should be available in the immediate vicinity.
Store in original container. Keep in an area equipped with solvent resistant flooring. Keep tightly closed in a dry and cool place. Keep away from direct sunlight. Keep in a well-ventilated place.
Keep away from food, drink and animal feedingstuffs. Smoking, eating and drinking should be prohibited in the application area. Wash hands before breaks and at the end of workday. Take off all contaminated clothing immediately.
Keep away from sources of ignition - No smoking. Vapours are heavier than air and may spread along floors. Vapours may form explosive mixtures with air. Take measures to prevent the build up of electrostatic charge.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Refer to protective measures listed in sections 7 and 8.
Protective gloves complying with EN 374. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time. Protective gloves should be replaced at first signs of wear. Material: Nitrile rubber, Break through time: >= 8 h, Glove thickness: 0,35 mm. Material: Fluorinated rubber, Break through time: >= 8 h, Glove thickness: 0,4 mm. Material: butyl-rubber, Break through time: >= 8 h, Glove thickness: 0,5 mm.
Safety goggles
In case of insufficient ventilation, wear suitable respiratory equipment. When aerosol or mist is formed use suitable respiratory protection. Recommended Filter type: A. Combination filter: A-P2. In case of intensive or longer exposure use self-contained breathing apparatus. Equipment should conform to EN 14387
Solvent resistant protective clothing
Do not flush into surface water or sanitary sewer system. Avoid subsoil penetration.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
No decomposition if stored and applied as directed.
Possible formation of peroxide. Reacts with oxidizing agents. Formation of explosive air/vapour mixtures is possible.
Heat, flames and sparks.
Strong oxidizing agents, Amines, Aldehydes, alkanolamines, alkalis, Strong acids
A complex mixture of airborne solids, liquids and gases, including carbon monoxide, carbon dioxide and other organic compounds will be evolved when this material undergoes combustion or thermal or oxidative degradation.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
12.2. Persistence and degradability
Readily biodegradable.
12.3. Bioaccumulative potential
:|log Kow 0,05 (25 °C)
Bioaccumulation is not expected.||| |**12.4. Mobility in soil**||||| |800000000158 /Version 3.0||14/20||EN|
Bioaccumulation is not expected.
12.4. Mobility in soil
The product is water soluble. Mobile in soils
12.5. Results of PBT and vPvB assessment
**CAS-No.** **67-63-0**| |||**Results of PBT and vPvB assessment**| |Result|:|Not persistent, bioaccumulative, and toxic (PBT)., Not very| |||persistent and very bioaccumulative (vPvB).|
This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. Not persistent, bioaccumulative, and toxic (PBT)., Not very persistent and very bioaccumulative (vPvB).
12.6. Endocrine disrupting properties
The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher.
12.7. Other adverse effects
Do not flush into surface water or sanitary sewer system. Avoid subsoil penetration.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Disposal together with normal waste is not allowed. Special disposal required according to local regulations. Do not let product enter drains. Contact waste disposal services. This product shall be disposed of or recovered in compliance with Directive 2008/98/EC on waste as lastly amended.
Disposal together with normal waste is not allowed. Special disposal required according to local regulations. Do not let product enter drains. Contact waste disposal services.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1219
- Shipping Name
- ISOPROPANOL
- Transport Class
- 3
- Packing Group
- II
Not applicable.
Not applicable.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
SDS updated according to Regulation (EU) 2020/878
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ISOPROPANOL COSMETIC GRADE?
The signal word is danger.
What is the physical form of ISOPROPANOL COSMETIC GRADE?
ISOPROPANOL COSMETIC GRADE is a liquid appearing as colourless, clear with colourless, clear color. It has alcohol-like odor.
What is ISOPROPANOL COSMETIC GRADE used for?
Identified use: See table in front of appendix for a complete overview of identified uses.
What are the hazard statements for ISOPROPANOL COSMETIC GRADE?
This substance has 3 hazard statements:
- H225: Highly flammable liquid and vapour.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
What is the melting point of ISOPROPANOL COSMETIC GRADE?
The melting point is -89 °C and the boiling point is 82 °C.