Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ISOPROPYL ALCOHOL 70%
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Sanitizer
Uses advised against
Reserved for industrial and professional use.
Manufacturers & Suppliers
ECOLAB PTE LTD
manufacturer
21 Gul Lane, Singapore 629416
65-6505-6868
Emergency Contacts
Emergency Contact
+(65)-31581349
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Isopropyl Alcohol | 67-63-0 | 60 - 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. Treat symptomatically. Get medical attention if symptoms occur.
Rinse with plenty of water.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention.
Rinse mouth. Get medical attention if symptoms occur.
Immediate Medical Attention
Get medical attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
High volume water jet
Fire Hazard. Keep away from heat and sources of ignition. Flash back possible over considerable distance. Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas.
Use water spray to cool unopened containers. In the event of fire and/or explosion do not breathe fumes.
Firefighter Protection
Use personal protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove all sources of ignition. Ensure clean-up is conducted by trained personnel only. Refer to protective measures listed in sections 7 and 8.
For large spills, dike spilled material or otherwise contain material to ensure runoff does not reach a waterway.
Do not allow contact with soil, surface or ground water.
collect with non-combustible absorbent material. Flush away traces with water.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes. Use only with adequate ventilation. Keep away from fire, sparks and heated surfaces. Take necessary action to avoid static electricity discharge (which might cause ignition of organic vapours). Wash hands thoroughly after handling. Open drum carefully as content may be under pressure. In case of mechanical malfunction, or if in contact with unknown dilution of product, wear full Personal Protective Equipment (PPE).
Keep away from heat and sources of ignition. Keep in a cool, well-ventilated place. Keep away from oxidizing agents. Keep out of reach of children. Keep container tightly closed. Store in suitable labeled containers.
Wash hands thoroughly after handling.
Keep away from fire, sparks and heated surfaces. Take necessary action to avoid static electricity discharge.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Effective exhaust ventilation system. Maintain air concentrations below occupational exposure standards.
Wear the following personal protective equipment: Standard glove type. Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough. Nitrile rubber, butyl-rubber, Unsupported neoprene
Safety goggles, Face-shield
When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. Organic vapour type
No special protective equipment required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No dangerous reaction known under conditions of normal use.
No dangerous reaction known under conditions of normal use.
Heat, flames and sparks.
None known.
In the event of fire, see Section 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of as unused product. If recycling is not practicable, dispose of contents/container in accordance with local regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1219
- Shipping Name
- ISOPROPANOL
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
All substances in this product comply with the Environmental Protection and Management (Hazardous Substances) Regulations and Fire Safety (Petroleum and Flammable Materials) Regulations.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ISOPROPYL ALCOHOL 70%?
The signal word is danger.
What is the physical form of ISOPROPYL ALCOHOL 70%?
ISOPROPYL ALCOHOL 70% is a liquid appearing as liquid with clear, colourless color. It has alcohol-like odor.
What is the solubility of ISOPROPYL ALCOHOL 70%?
no data available
What is ISOPROPYL ALCOHOL 70% used for?
Sanitizer
What are the hazard statements for ISOPROPYL ALCOHOL 70%?
This substance has 3 hazard statements:
- H225: Highly flammable liquid and vapour.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
What is the melting point of ISOPROPYL ALCOHOL 70%?
The melting point is no data available and the boiling point is no data available.