Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Wilfaret 1214-AE2, 1216-AE2, KBA 1/UEF, KBA 2, KBA2 RSPO MB, KBA 2 UEF, KBE 2, KBE2 RSPO MB
- Chemical Name
- Alcohols, C12-14, ethoxylated
Regulatory Identifiers
- CAS Number
- 68439-50-9 Check regulations →
- EC Number
- 500-213-3 Check regulations →
- REACH No.
- 01-2119487984-16
Identified Uses
Industrial use, detergent, emulsifier(substance), Cleaner for household
Uses advised against
No data available.
Manufacturers & Suppliers
WILMAR Europe Trading B.V.
Central Post – Entrance West, 7th floor Delftseplein 27G NL-3013 AA Rotterdam
+31-10-2178800
Emergency Contacts
Giftinformationszentrum Nord
+49 (0)551 192 40
DE, EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Alcohols, C12-14, ethoxylated EC: 500-213-3 | 68439-50-9 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove affected person from the immediate area. Ensure supply of fresh air. Irregular breathing/no breathing: artificial respiration.
Wash immediately with plenty of water for several minutes.
Remove contact lenses. Rinse eye thoroughly under running water keeping eyelids wide open and protecting the unaffected eye (at least 10 to 15 minutes). Seek medical assistance.
Do not induce vomiting. Rinse out mouth and give plenty of water to drink. Never give anything by mouth to an unconscious person. Call a doctor immediately.
Immediate Medical Attention
No data available.
Medical Treatment
No data available.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol-resistant foam; Dry chemical extinguisher; Carbon dioxide; Water spray jet
High power water jet
In the event of fire, the following can be released: Carbon dioxide (CO2); Carbon monoxide (CO)
Cool endangered containers with water spray jet.
Firefighter Protection
Use self-contained breathing apparatus. Wear protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Refer to protective measures listed in sections 7 and 8. Avoid contact with skin, eyes and clothing.
Do not discharge into the drains/surface waters/groundwater. Do not discharge into the subsoil/soil.
When picked up, treat material as prescribed under heading "Disposal considerations".
Materials: absorbent material (e.g., sand, kieselguhr, universal binder)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Provide good ventilation of working area (local exhaust ventilation, if necessary).
Keep container tightly closed and dry in a cool, well-ventilated place. Protect from heat and direct sunlight.
Do not eat, drink or smoke during work time. Keep away from foodstuffs and beverages. Wash hands before breaks and after work. Do not inhale vapours. Use barrier skin cream. Avoid contact with eyes. Provide eye wash fountain in work area. Have emergency shower available.
Keep away from sources of heat and ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Sufficient protection is given wearing suitable protective gloves checked according to i.e. EN 374, in the event of risk of skin contact with the product. Before use, the protective gloves should be tested in any case for its specific workstation suitability (i.e. mechanical resistance, product compatibility and antistatic properties). Adhere to the manufacturer's instructions and information relating to the use, storage, care and replacement of protective gloves. Protective gloves shall be replaced immediately when physically damaged or worn. Design operations thus to avoid permanent use of protective gloves. Appropriate Material Nitrile butyl rubber Appropriate Material PVC
Safety glasses with side protection shield (EN 166)
If workplace exposure limits are exceeded, a respiration protection approved for this particular job must be worn. In case of aerosol and mist formation, take appropriate measures for breathing protection in the event workplace threshold values are not specified.
Normal chemical work clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage and handling conditions (See section 7).
Heat, naked flames and other ignition sources.
No hazardous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3082
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Wilfaret 1214-AE2, 1216-AE2, KBA 1/UEF, KBA 2, KBA2 RSPO MB, KBA 2 UEF, KBE 2, KBE2 RSPO MB?
The signal word is warning.
What is the physical form of Wilfaret 1214-AE2, 1216-AE2, KBA 1/UEF, KBA 2, KBA2 RSPO MB, KBA 2 UEF, KBE 2, KBE2 RSPO MB?
Wilfaret 1214-AE2, 1216-AE2, KBA 1/UEF, KBA 2, KBA2 RSPO MB, KBA 2 UEF, KBE 2, KBE2 RSPO MB is a liquid appearing as colourless with colourless color. It has characteristic odor.
What is the solubility of Wilfaret 1214-AE2, 1216-AE2, KBA 1/UEF, KBA 2, KBA2 RSPO MB, KBA 2 UEF, KBE 2, KBE2 RSPO MB?
No data available
What is Wilfaret 1214-AE2, 1216-AE2, KBA 1/UEF, KBA 2, KBA2 RSPO MB, KBA 2 UEF, KBE 2, KBE2 RSPO MB used for?
Industrial use, detergent, emulsifier(substance), Cleaner for household
What are the hazard statements for Wilfaret 1214-AE2, 1216-AE2, KBA 1/UEF, KBA 2, KBA2 RSPO MB, KBA 2 UEF, KBE 2, KBE2 RSPO MB?
This substance has 1 hazard statement:
- H410: Very toxic to aquatic life with long lasting effects.
What is the melting point of Wilfaret 1214-AE2, 1216-AE2, KBA 1/UEF, KBA 2, KBA2 RSPO MB, KBA 2 UEF, KBE 2, KBE2 RSPO MB?
The melting point is -6.18 - 10.75 °C and the boiling point is 266.95 - 400 °C.