Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- WILFARIN LA1299 / WILFARIN LA1299 RSPO (MB)
- Product Form
- liquid
- Chemical Name
- lauric acid, pure
Regulatory Identifiers
- CAS Number
- 143-07-7 Check regulations →
- EC Number
- 205-582-1 Check regulations →
- REACH No.
- 01-2119538184-40
Identified Uses
Industrial use
Uses advised against
No data available.
Manufacturers & Suppliers
WILMAR Europe Trading B.V.
manufacturer
Central Post – Entrance West, 7th floor, Delftseplein 27G, NL-3013 AA Rotterdam
+31-10-2178800
Emergency Contacts
Giftinformationszentrum Nord
+49 (0)551 192 40
DE, EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
lauric acid, pure
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| lauric acid, pure EC: 205-582-1 | 143-07-7 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove affected person from the immediate area. Ensure supply of fresh air. Irregular breathing/no breathing: artificial respiration.
Wash off immediately with soap and water.
Remove contact lenses. Rinse eye thoroughly under running water keeping eyelids wide open and protecting the unaffected eye (at least 10 to 15 minutes). Seek medical assistance.
Do not induce vomiting. Call a doctor immediately. Never give anything by mouth to an unconscious person.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam; Dry chemical extinguisher; Carbon dioxide; Extinguishing powder
High power water jet
In the event of fire, the following can be released: Carbon dioxide (CO2); Carbon monoxide (CO)
Cool endangered containers with water spray jet.
Firefighter Protection
Use self-contained breathing apparatus. Wear protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Refer to protective measures listed in sections 7 and 8. Ensure adequate ventilation.
Do not discharge into the drains/surface waters/groundwater. Do not discharge into the subsoil/soil.
Contain and collect spillage
Materials: non-combustible absorbent materials, e.g. sand, earth, vermiculite, diatomaceous earth
Related Products
Similar products with comparable safety profiles
WILFARIN LA1299 / WILFARIN LA1299 RSPO (MB), liquid
CAS: 143-07-7
WILFARIN MA-1498 / MA-1499
CAS: 544-63-8
WILFARIN OA-7075; Wilfarin OA7070
CAS: 67701-08-0
Wilfarol 1214, 1214 RSPO Segregated / RSPO Mass Balance
CAS: 80206-82-2
Wilfarol 1216, 1216 RSPO Segregated / RSPO Mass Balance
CAS: 68855-56-1
RAFINOL 930 FF
CAS: 70131-50-9
FARMIN DM 4098
CAS: 112-75-4
FSNK SR CR AN HERB K204264000
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Risks inherent to handling the product must be minimised by applying the appropriate protective and preventive measures. Working processes should - so far as possible, according to the state of the art - be designed to rule out bodily contact or the release of hazardous substances.
Keep container tightly closed and dry in a cool, well-ventilated place.
Do not eat, drink or smoke during work time. Keep away from foodstuffs and beverages. Wash hands before breaks and after work. Do not inhale vapours. Use barrier skin cream. Avoid contact with eyes. Provide eye wash fountain in work area. Have emergency shower available.
Keep away from sources of heat and ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Before use, the protective gloves should be tested in any case for its specific work-station suitability (i.e. mechanical resistance, product compatibility and antistatic properties). Adhere to the manufacturer's instructions and information relating to the use, storage, care and replacement of protective gloves. Protective gloves shall be replaced immediately when physically damaged or worn. Design operations thus to avoid permanent use of protective gloves. Protective gloves (EN 455). Appropriate Material: nitrile
Safety glasses with side protection shield (EN 166)
If workplace exposure limits are exceeded, a respiration protection approved for this particular job must be worn. In case of aerosol and mist formation, take appropriate measures for breathing protection in the event workplace threshold values are not specified.
Normal chemical work clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage and handling conditions (See section 7).
No data available.
Dangerous reactions are not to be expected when handling product according to its intended use.
None, if handled according to intended use.
Oxidizing agents
None, if handled according to intended use.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.2 Persistence and degradability
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
Results of PBT and vPvB assessment
The product and the substance lauric acid, pure are not considered to be PBT or vPvB.
12.6 Endocrine disrupting properties
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Disposal of the product should be carried out in accordance with all applicable regulations following consultation with the responsible local authority and the disposal company in an authorised and suitable disposal facility.
Disposal of the product should be carried out in accordance with all applicable regulations following consultation with the responsible local authority and the disposal company in an authorised and suitable disposal facility.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3077
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. MOLTEN
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Adhere to the national sanitary and occupational safety regulations when using this product.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for WILFARIN LA1299 / WILFARIN LA1299 RSPO (MB)?
The signal word is danger.
What is the physical form of WILFARIN LA1299 / WILFARIN LA1299 RSPO (MB)?
WILFARIN LA1299 / WILFARIN LA1299 RSPO (MB) is a solid with light yellow color. It has musty; fatty-like odor.
What is WILFARIN LA1299 / WILFARIN LA1299 RSPO (MB) used for?
Industrial use
What are the hazard statements for WILFARIN LA1299 / WILFARIN LA1299 RSPO (MB)?
This substance has 3 hazard statements:
- H315: Causes skin irritation.
- H318: Causes serious eye damage.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of WILFARIN LA1299 / WILFARIN LA1299 RSPO (MB)?
The melting point is min. 42 - 44 °C and the boiling point is 299 °C.