NextSDS Logo
Safety Data Sheet EN

Trilon® M Liquid T

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Trilon® M Liquid T
Product Form
Liquid

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Chemical

Manufacturers & Suppliers

B

BASF CORPORATION

national supplier

100 Park Avenue Florham Park, NJ 07932, USA

+1 973 245-6000

Emergency Contacts

CHEMTREC

1-800-424-9300

BASF HOTLINE

1-800-832-HELP (4357)

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Met. Corr. Cat. 1 H290

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H290 May be corrosive to metals.

Precautionary Statements

P234 Keep only in original packaging.
P390 Absorb spillage to prevent material damage.
P406 Store in a corrosion-resistant/... container with a resistant inner liner.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Sodium Hydroxide 1310-73-2 0.3 - 1% No
Acetic acid, hydroxy-, monosodium salt 2836-32-0 1% No
trisodium nitrilotriacetate 5064-31-3 0.1% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Keep patient calm, remove to fresh air.

Skin contact

Wash thoroughly with soap and water.

Eye contact

Wash affected eyes for at least 15 minutes under running water with eyelids held open.

Ingestion

Rinse mouth and then drink plenty of water.

Medical Treatment

Symptomatic treatment (decontamination, vital functions).

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

water spray, dry powder, foam

Specific hazards

Hazards during fire-fighting: harmful vapours Evolution of fumes/fog. The substances/groups of substances mentioned can be released in case of fire.

Firefighter Protection

Wear a self-contained breathing apparatus in confined areas or when exposed to combustion products.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Small spill

Pick up with absorbent material (e.g. sand, sawdust, general-purpose binder).

Large spill

Pump off product.

Environmental

Do not discharge into drains/surface waters/groundwater.

Cleanup methods

For small amounts: Pick up with absorbent material. For large amounts: Pump off product. Spills should be contained, solidified, and placed in suitable containers for disposal.

Materials: absorbent material (e.g. sand, sawdust, general-purpose binder)

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Keep container tightly closed. Protect from the effects of light.

Storage

Keep in a cool place. The packed product is not damaged by low temperatures or by frost. Protect from temperatures above: 50 °C

Fire prevention

No special precautions necessary.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide local exhaust ventilation to control vapours/mists.

Hands

Chemical resistant protective gloves

Eyes

Wear face shield or tightly fitting safety goggles (chemical goggles) if splashing hazard exists.

Respiratory

Wear respiratory protection if ventilation is inadequate. Breathing protection if breathable aerosols/dust are formed.

Skin/Body

Body protection must be chosen based on level of activity and exposure.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
colourless to yellowish
Colour Intensity
---
Form
liquid
Odor
product specific
Odor Threshold
not determined
Ph
11 (10 g/l)
Melting Point
---
Boiling Point
approx. 100 °C
Flash Point
A flash point determination is unnecessary due to the high water content.
Freezing Point
not determined
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Value can be approximated from Henry's Law Constant or vapor pressure.
Vapor Pressure
20 hPa (20 °C)
Vapor Density
not determined
Relative Density
1.29 - 1.33 (20 °C)
Bulk Density
---
Density
1.31 g/cm3 (20 °C)
Flammability
not self-igniting
Upper Explosive Limit
For liquids not relevant for classification and labelling.
Lower Explosive Limit
For liquids not relevant for classification and labelling. The lower explosion point may be 5 - 15 °C below the flash point.
Explosive Limits
---
Auto Ignition Temperature
> 200 °C
Decomposition Temperature
not determined
Solubility
---
Partition Coefficient
Study does not need to be conducted.
Solubility In Water
(20 °C) miscible
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
approx. 25 mPa.s (23 °C)
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is stable if stored and handled as prescribed/indicated.

Reactivity

No hazardous reactions if stored and handled as prescribed/indicated. Corrosion to metals: Corrosive effect on: Aluminium Oxidizing properties: not fire-propagating

Hazardous reactions

No hazardous reactions when stored and handled according to instructions. The product is chemically stable.

Avoid

No data available.

Incompatible

oxidizing agents

Decomposition

No hazardous decomposition products if stored and handled as prescribed/indicated.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN 3267
Shipping Name
CORROSIVE LIQUID, BASIC, ORGANIC, N.O.S. (contains N,N-BIS(CARBOXYMETHYL)-ALANIN, TRISODIUM SALT) CORROSIVE ON ALUMINIUM
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Trilon® M Liquid T?

The signal word is warning.

What is the physical form of Trilon® M Liquid T?

Trilon® M Liquid T is a liquid with colourless to yellowish color. It has product specific odor.

What is Trilon® M Liquid T used for?

Chemical

What are the hazard statements for Trilon® M Liquid T?

This substance has 1 hazard statement:

  • H290: May be corrosive to metals.

Compliance Scanner

Scan your compliance