Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- X107070 EU
- Product Form
- substance
- Product Code
- 94527534_PGC_CLPR7
- Synonyms
- 10275475
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- 01-2119485907-20-0000, 01-2119485905-24-0000
- UFI Code
- Not applicable
Identified Uses
Intermediate Laboratory chemicals Lubricant Lubricant additives Processing aid Solvent Metal working fluids / rolling oils
Uses advised against
No information available
Manufacturers & Suppliers
Procter & Gamble Nederland B.V.
manufacturer
Watermanweg 100, 3067 GG, Rotterdam, Nederlands
+322-456-4150
P&G Chemicals - Europe
regional supplier
47, Route de Saint-Georges, 1213 Petit-Lancy1, Switzerland
+(44) 778 710 6007
Emergency Contacts
CHEMTREC
+1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
This product does not contain candidate substances of very high concern at a concentration >=0.1% (Regulation (EC) No. 1907/2006 (REACH), Article 59).
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Octadecan-1-ol (P&GC) EC: 204-017-6 | 112-92-5 | 65 - 75% | No |
| Hexadecan-1-ol (P&GC) EC: 253-149-0 | 36653-82-4 | 25 - 32% | No |
| Tetradecan-1-ol (P&GC) EC: 204-000-3 | 112-72-1 | 0.25% | Yes |
Notes
Full text of H- and EUH-phrases: see section 16 Acute Toxicity Estimate No information available
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. If breathing has stopped, give artificial respiration. Get medical attention immediately. If breathing is difficult, (trained personnel should) give oxygen.
Wash skin with soap and water. In the case of skin irritation or allergic reactions see a physician.
Rinse thoroughly with plenty of water for at least 15 minutes, lifting lower and upper eyelids. Consult a physician.
Call a physician. Do NOT induce vomiting. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
Get medical attention immediately (inhalation), consult a physician (eyes/skin/ingestion).
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol resistant foam. Carbon dioxide (CO2). Dry chemical. Water spray or fog.
Do not scatter spilled material with high pressure water streams.
No information available.
Firefighter Protection
Firefighters should wear self-contained breathing apparatus and full firefighting turnout gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8.
See Section 12 for additional Ecological Information.
Soak up with inert absorbent material. Pick up and transfer to properly labeled containers.
Materials: inert absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid generation of dust.
Keep container tightly closed in a dry and well-ventilated place.
Handle in accordance with good industrial hygiene and safety practice.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
If exposure limits are exceeded or irritation is experienced, ventilation and evacuation may be required.
Wear suitable gloves. Long term (repeated): 0.35 mm, >=480 minutes, nitrile rubber; 0.5 mm, >=480 minutes, butyl rubber. Short term: 0.5 mm, >=60 minutes, Natural Rubber; 0.5 mm, >=60 minutes, Latex gloves.
Tight sealing safety goggles.
No protective equipment is needed under normal use conditions. If exposure limits are exceeded or irritation is experienced, ventilation and evacuation may be required. In the case of dust or aerosol formation use respirator with an approved filter.
Wear protective gloves and protective clothing.
Avoid subsoil penetration. Do not flush into surface water or sanitary sewer system.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Strong oxidizing agents.
None under normal processing.
dust formation.
Strong oxidizing agents.
None known based on information supplied.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of in accordance with local regulations. Dispose of waste in accordance with environmental legislation.
Dispose of in accordance with local regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not regulated
- Transport Class
- Not regulated
- Packing Group
- Not regulated
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is X107070 EU known by?
X107070 EU is also known as: 10275475
What is the hazard signal word for X107070 EU?
The signal word is no signal word.
What is the physical form of X107070 EU?
X107070 EU is a solid @ 25°c with colorless color. It has odorless odor.
What is the solubility of X107070 EU?
Not applicable
What is X107070 EU used for?
Intermediate Laboratory chemicals Lubricant Lubricant additives Processing aid Solvent Metal working fluids / rolling oils
What is the melting point of X107070 EU?
The melting point is 48 - 52 °C and the boiling point is 249 °C.