PolyTHF® 1000

Keep patient calm, remove to fresh air, seek medical attention.

Wash thoroughly with soap and water. If irritation develops, seek medical attention.

Symptoms: irritation

Wash affected eyes for at least 15 minutes under running water with eyelids held open.

Rinse mouth immediately and then drink plenty of water, seek medical attention.

water spray, foam, dry powder, carbon dioxide

nitrogen oxides, carbon oxides. The substances/groups of substances mentioned can be released in case of fire.

Use personal protective clothing. Information regarding personal protective measures see, section 8. Avoid contact with skin.

Allow to solidify and sweep/shovel up.

Allow to solidify and sweep/showel up.

Discharge into the environment must be avoided.

sweep/shovel up

Ensure thorough ventilation of stores and work areas. Prevent contact with air/oxygen (formation of peroxide).

Containers should be stored tightly sealed in a dry place. Keep under nitrogen. Prevent entry of air/oxygen. Formation of peroxides. The product is stabilized, the shelf life should be noted. From the data on storage duration in this safety data sheet no agreed statement regarding the warrantee of application properties can be deduced. Protect from temperatures above: 90 °C. If transport time lasts more than 2 days the packed product must be protected against exceeding the indicated temperature.

sources of ignition should be kept well clear - fire extinguishers should be kept handy.

Suitable chemical resistant safety gloves (EN 374) also with prolonged, direct contact (Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN 374): E.g. nitrile rubber (0.4 mm), chloroprene rubber (0.5 mm), butyl rubber (0.7 mm) etc. Supplementary note: The specifications are based on tests, literature data and information of glove manufacturers or are derived from similar substances by analogy. Due to many conditions (e.g. temperature) it must be considered, that the practical usage of a chemical-protective glove in practice may be much shorter than the permeation time determined through testing.

Safety glasses with side-shields (frame goggles) (e.g. EN 166)

Respiratory protection required in case of exceptional circumstances (e.g.: accidental release, exceeding the occupational exposure limit) Combination filter for gases/vapours of organic compounds and solid and liquid particles (f.e. EN 14387 Type A-P2)

Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of dust).

For information regarding environmental exposure controls, see Section 6.

The product is stable if stored and handled as prescribed/indicated.

No hazardous reactions if stored and handled as prescribed/indicated.

Risk of self-ignition when a large surface area is produced due to fine dispersion. Self-ignition at high temperatures.

Temperature: > 100 °C

strong oxidizing agents

tetrahydrofuran