Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Aluminum chloride, 0.5M aq. soln.
- Product Code
- J61582
- Synonyms
- No information available
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Laboratory chemicals.
Uses advised against
Food, drug, pesticide or biocidal product use.
Manufacturers & Suppliers
Thermo Fisher Scientific Chemicals, Inc.
30 Bond Street Ward Hill, MA 01835-8099
800-343-0660
Emergency Contacts
Emergency Contact
001-800-227-6701
Emergency Contact
+32 14 57 52 11
Emergency Contact
001-201-796-7100
Emergency Contact
+32 14 57 52 99
CHEMTREC
001-800-424-9300
CHEMTREC
001-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. If not breathing, give artificial respiration.
Wash off immediately with plenty of water for at least 15 minutes.
Symptoms: Skin irritation
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
Clean mouth with water and drink afterwards plenty of water.
Immediate Medical Attention
Get medical attention for eye contact. Get medical attention if inhalation symptoms occur. Call a physician if skin irritation persists or if general symptoms persist.
Medical Treatment
Treat symptomatically
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Keep product and empty container away from heat and sources of ignition.
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Should not be released into the environment. See Section 12 for additional Ecological Information.
Soak up with inert absorbent material.
Materials: inert absorbent material
Related Products
Similar products with comparable safety profiles
Aluminum Chlorohydrate Solution
---
Aluminium chloride, anhydrous
CAS: 7446-70-0
Aluminum chloride hydroxide sulfate
CAS: 39290-78-3
Zinc sulfate, 100mM aq. soln.
---
Cobalt Chloride Solution, 0.1M
---
Aluminum sulfate, anhydrous
CAS: 10043-01-3
Polyaluminium Chloride
CAS: 1327-41-9
Aluminum fluoride, anhydrous
CAS: 7784-18-1
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wear personal protective equipment/face protection. Do not get in eyes, on skin, or on clothing. Avoid ingestion and inhalation.
Keep containers tightly closed in a dry, cool and well-ventilated place.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure that eyewash stations and safety showers are close to the workstation location.
Wear appropriate protective gloves to prevent skin exposure.
Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. Recommended Filter type: Particulates filter conforming to EN 143.
Wear appropriate protective clothing to prevent skin exposure.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
None known, based on information available
Hazardous polymerization does not occur. None under normal processing.
Incompatible products.
Strong oxidizing agents
None under normal use conditions
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN2581
- Shipping Name
- ALUMINIUM CHLORIDE SOLUTION
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Aluminum chloride, 0.5M aq. soln. known by?
Aluminum chloride, 0.5M aq. soln. is also known as: No information available
What is the hazard signal word for Aluminum chloride, 0.5M aq. soln.?
The signal word is warning.
What is the physical form of Aluminum chloride, 0.5M aq. soln.?
Aluminum chloride, 0.5M aq. soln. is a liquid appearing as colorless with colorless color. It has no information available odor.
What is the solubility of Aluminum chloride, 0.5M aq. soln.?
No information available
What is Aluminum chloride, 0.5M aq. soln. used for?
Laboratory chemicals.
What are the hazard statements for Aluminum chloride, 0.5M aq. soln.?
This substance has 2 hazard statements:
- H315: Causes skin irritation
- H319: Causes serious eye irritation
What is the melting point of Aluminum chloride, 0.5M aq. soln.?
The melting point is No data available and the boiling point is No information available.