Polyaluminium Chloride Solution

Remove victim to fresh air and keep at rest in a position comfortable for breathing. If respiratory symptoms persist, get medical advice/attention.

Symptoms: Respiratory symptoms

Wash with plenty of soap and water. Take off contaminated clothing and wash it before reuse. If skin irritation occurs, get medical advice/attention. Wash contaminated clothing and shoes before reuse.

Symptoms: Skin irritation

Immediately flush eyes with running water for several minutes, holding eyelids open and occasionally lifting the upper and lower lids. Remove contact lenses if present and easy to do. Continue rinsing for at least 15 minutes. If eye irritation persists, get medical advice/attention.

Symptoms: Eye irritation

Rinse mouth, then drink plenty of water. Do NOT induce vomiting. Call a Poison Centre or doctor/physician for advice. If vomiting occurs, lean patient forward or place on left side (head-down position, if possible) to maintain an open airway and prevent aspiration. Never give anything by mouth to an unconscious person.

If material is involved in a fire, use extinguishing media appropriate to surrounding fire conditions. Suppress (knock down) gases/vapours/mists with a water spray jet.

Containers may explode when heated.

If safe to do so, move undamaged containers from fire area. Cool containers with water spray until well after fire is out.

Ensure adequate ventilation. Do not touch or walk through spilled material - Slippery when spilt! Avoid breathing vapours and contact with eyes, skin and clothing.

For minor spills, contain and absorb with inert materials (sand, earth), sweep up, place contaminated material in a sealed container and place in garbage.

For large quantities dispose of at an approved waste management site.

Prevent entry into drains and waterways.

Wash area down with excess water.

Materials: sand, earth

Avoid breathing mist/vapours/aerosols and contact with eyes, skin and clothing. Do not ingest. Use personal protective equipment as required (see SECTION 8).

Store in a cool, dry and well-ventilated place, out of direct sunlight.

Handle in accordance with good industrial hygiene and safety practice.

Stable under normal conditions. This product is stable and unlikely to react or decompose under normal circumstances.

Mildly corrosive to metals.

Hazardous reactions will not occur under normal transport or storage conditions. Hazardous Polymerisation: Will not occur.

Avoid extremes of temperature.

Incompatible/reactive with acids, alkalis, strong oxidising agents, metals and nylon materials.

Decomposes on heating, emitting hydrogen chloride gas and other toxic fumes.

Dispose of contents/container in accordance with local/regional/national regulations.