Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- N-Methyl-2-Pyrrolidone (NMP)
- Product Code
- 51059-00, P5105901
- Chemical Name
- N-Methyl-2-Pyrrolidone
Regulatory Identifiers
- CAS Number
- 872-50-4 Check regulations →
- REACH No.
- 01-2119472430-46-0008
Identified Uses
Solvent
Uses advised against
None known.
Manufacturers & Suppliers
Eastman Chemical Company
manufacturer
200 South Wilcox Drive, 37660-5147 Kingsport
+14232292000
http://www.EASTMAN.com
Emergency Contacts
Emergency Contact
111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Eastman is committed to the safety, health and environment of our employees, our customers, and the communities we operate within. As part of this commitment, Eastman's Safety Data Sheets (SDS) are prepared in accordance with all applicable national and local regulations. The compositions of our documents reflect these requirements which include, but are not limited to, requirements under the Globally Harmonized System of Classification and Labeling (GHS). These compositions commonly involve the use of ranges versus specific analytical values.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| N-methyl pyrrolidone EC: 212-828-1 | 872-50-4 | 90 - 100% | No |
Notes
If you require a composition that is more specific, please refer to the Certificate of Analysis, sales specification, or contact your Customer Service Representative.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. Call a physician or poison control centre immediately.
Symptoms: May cause respiratory irritation.
Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes. Wash contaminated clothing before re-use. Get medical attention. Thoroughly clean shoes before reuse.
Symptoms: Causes skin irritation.
Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/ attention.
Symptoms: Causes serious eye irritation.
Seek medical advice.
Immediate Medical Attention
Call a physician or poison control centre immediately. Get medical attention. Seek medical advice.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol-resistant foam, Carbon dioxide (CO2), Dry chemical, Water spray
Water spray jet
Water may be ineffective. The product will float on water and can be reignited on surface water.
Firefighter Protection
Wear an approved positive pressure self-contained breathing apparatus in addition to standard fire fighting gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid release to the environment.
soak up with non-combustible absorbent material
Materials: non-combustible absorbent material (e.g. sand, earth, diatomaceous earth, vermiculite)
Related Products
Similar products with comparable safety profiles
1-Methyl-2-pyrrolidinone
CAS: 872-50-4
1-Methyl-2-pyrrolidinone
CAS: 872-50-4
5-Ethyl-2-methylpyridine
---
N-Methylformamide
CAS: 123-39-7
3-Methylpyrrolidine
CAS: 34375-89-8
1-Methyl-2-pyrrolidinone, HPLC Grade
CAS: 872-50-4
2-Pyrrolidone
CAS: 616-45-5
2-Methylpiperazine
CAS: 109-07-9
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid inhalation of vapor or mist. Do not get on skin or clothing. Do not get in eyes. Avoid contact with skin, eyes and clothing. Do not swallow. Ensure adequate ventilation. Wash thoroughly after handling. Keep away from fire (No Smoking). Keep away from fire, sparks and heated surfaces. Do not use sparking tools.
Keep container closed when not in use. Store locked up.
Handle in accordance with good industrial hygiene and safety practice.
Keep away from fire (No Smoking). Keep away from fire, sparks and heated surfaces. Do not use sparking tools.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation.
Rubber gloves Neoprene gloves The data about break through time/strength of material are standard values! The exact break through time/strength of material has to be obtained from the producer of the protective glove.
Wear safety glasses with side shields (or goggles). Face-shield Always wear eye protection when the potential for inadvertent eye contact with the product cannot be excluded.
Use respiratory protection unless adequate local exhaust ventilation is provided or exposure assessment demonstrates that exposures are within recommended exposure guidelines.
Wear suitable protective clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Stable
Hazardous reactions : Stable
Heat, flames and sparks.
Oxidizing agents
Carbon dioxide (CO2), Carbon monoxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of in accordance with local regulations.
Dispose of in accordance with local regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Chemical safety assessment: None.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for N-Methyl-2-Pyrrolidone (NMP)?
The signal word is danger.
What is the physical form of N-Methyl-2-Pyrrolidone (NMP)?
N-Methyl-2-Pyrrolidone (NMP) is a liquid appearing as liquid with colourless color. It has amine-like odor.
What is N-Methyl-2-Pyrrolidone (NMP) used for?
Solvent
What are the hazard statements for N-Methyl-2-Pyrrolidone (NMP)?
This substance has 4 hazard statements:
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H335: May cause respiratory irritation.
- H360: May damage fertility or the unborn child.
What is the melting point of N-Methyl-2-Pyrrolidone (NMP)?
The melting point is -24.2 °C and the boiling point is 204 °C.