Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Crude linseed oil
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Binder, Raw materials for resins, Coating compound / Surface coating / paint, Coating, Greasing of stains, Woods treatment, Food, Feed
Manufacturers & Suppliers
LINAGRO N.V.
Kortemarkstraat 8 B - 8810 Lichtervelde
Emergency Contacts
Emergency Contact
+32-51.59.12.40
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
- Chemical characterization: - CAS No. Description 8001-26-1 Linseed oil - Identification number(s) - EINECS Number: 232-278-6
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Linseed oil EC: 232-278-6 | 8001-26-1 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Rinse out mouth and then drink plenty of water. If symptoms persist, consult a doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, sand, extinguishing powder.
Water.
Firefighter Protection
Fully protecting cloths and respiration apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow to enter sewers / surface or ground water.
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Dispose contaminated material as waste according to item 13.
Materials: liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No special measures required.
Suitable material for receptacles and pipes: Stainless steel. Do not store in copper or copper related containers as it could affect the oil's colour. Protect from exposure to the light. +10°C up to +30°C and without air contact.
Self-ignition can occur in case of fine hot particles. Self-ignition may occur in case fine particles are absorbed in e.g. sawdust, clothes or insulating material. If absorbed in special oil absorbers or clothes, keep in fire-safe place (self-ignition may occur).
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
The glove material has to be impermeable and resistant to the product / the substance / the preparation / the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Goggles recommended during refilling.
Not required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
In very fine dispersion in contact with air possible danger of self ignition.
strong oxidants
Acrolein, Carbon monoxide and carbon dioxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Crude linseed oil?
The signal word is no signal word.
What is the physical form of Crude linseed oil?
Crude linseed oil is a fluid with light braun color. It has characteristic odor.
What is Crude linseed oil used for?
Binder, Raw materials for resins, Coating compound / Surface coating / paint, Coating, Greasing of stains, Woods treatment, Food, Feed
What is the melting point of Crude linseed oil?
The melting point is -20°C and the boiling point is ca. 343°C.