Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- DYNAMON EASY 41
- Product Code
- 9021793
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Admixture for concrete
Uses advised against
Data not available
Manufacturers & Suppliers
MAPEI BENELUX SA/NV
manufacturer
Zoning Industriel - Rue de l'Avenir, 40 - B-4460 Grace-Hollogne
+32-4-2397070
http://www.mapei.be
Emergency Contacts
Emergency Contact
+32 (0)70 245 245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture identification: DYNAMON EASY 41
Not Relevant
Notes
Hazardous components within the meaning of the CLP regulation and related classification: None
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove casualty to fresh air and keep warm and at rest.
Wash with plenty of water and soap.
Wash immediately with water.
Do not induce vomiting, get medical attention showing the SDS and the hazard label.
Immediate Medical Attention
get medical attention showing the SDS and the hazard label.
Medical Treatment
Not available (see paragraph 4.1)
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water. Carbon dioxide (CO2).
None in particular.
Do not inhale explosion and combustion gases.
Firefighter Protection
Use suitable breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear personal protection equipment. Remove persons to safety.
Do not allow to enter into soil/subsoil. Do not allow to enter into surface water or drains.
Suitable material for taking up: absorbing material, organic, sand
Materials: absorbing material, organic, sand
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes, inhalation of vapours and mists. Do not eat or drink while working.
Keep away from food, drink and feed. Adequately ventilated premises.
Do not eat or drink while working.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Not available
Suitable materials for safety gloves; EN ISO 374: Polychloroprene - CR: thickness >=0,5mm; breakthrough time >=480min. Nitrile rubber - NBR: thickness >=0,35mm; breakthrough time >=480min. Butyl rubber - IIR: thickness >=0,5mm; breakthrough time >=480min. Fluorinated rubber - FKM: thickness >=0,4mm; breakthrough time >=480min.
Not needed for normal use. Anyway, operate according good working practices.
Not needed for normal use. Anyway, operate according good working practices.
No special precaution must be adopted for normal use.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions
Stable under normal conditions
None.
Stable under normal conditions.
None in particular.
None.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The generation of waste should be avoided or minimized wherever possible. Recover if possible. Contact and send to an authorized waste disposal service.
Dispose of surplus and nonrecyclable products via a licensed waste disposal contractor. Dispose of product according to all federal, state and local applicable regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not Applicable
- Shipping Name
- Not Applicable
- Transport Class
- Not Applicable
- Packing Group
- Not Applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
No Chemical Safety Assessment has been carried out for the mixture.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for DYNAMON EASY 41?
The signal word is no signal word.
What is the physical form of DYNAMON EASY 41?
DYNAMON EASY 41 is a liquid appearing as liquid with light brown color. It has characteristic odor.
What is DYNAMON EASY 41 used for?
Admixture for concrete
What is the melting point of DYNAMON EASY 41?
The melting point is Not available and the boiling point is Not available.