Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Pluriol® E 400 LS-FLEX
- Chemical Name
- polyethylene glycol
Regulatory Identifiers
- CAS Number
- 25322-68-3 Check regulations →
Identified Uses
Raw material for the chemical-technical industry
Manufacturers & Suppliers
BASF SE
global supplier
67056 Ludwigshafen GERMANY
+49 621 60-44676
Emergency Contacts
Emergency Contact
+49 180 2273-112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
polyethylene glycol
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| polyethylene glycol | 25322-68-3 | --- | No |
Notes
No particular hazards known.
First Aid Measures
Emergency procedures for chemical exposure incidents
Keep patient calm, remove to fresh air, seek medical attention.
Wash thoroughly with soap and water.
Wash affected eyes for at least 15 minutes under running water with eyelids held open.
Rinse mouth and then drink 200-300 ml of water.
Immediate Medical Attention
If inhaled: ... seek medical attention. Indication of any immediate medical attention and special treatment needed Treatment: Symptomatic treatment (decontamination, vital functions).
Medical Treatment
Symptomatic treatment (decontamination, vital functions).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
water spray, dry powder, foam
harmful vapours Evolution of fumes/fog. The substances/groups of substances mentioned can be released in case of fire.
Firefighter Protection
Wear a self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective clothing.
For residues: Pick up with suitable absorbent material.
For large amounts: Pump off product.
Contain contaminated water/firefighting water. Do not discharge into drains/surface waters/groundwater.
For large amounts: Pump off product. For residues: Pick up with suitable absorbent material.
Materials: suitable absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No special measures necessary provided product is used correctly.
Keep container tightly closed and dry; store in a cool place.
No special precautions necessary.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Chemical resistant protective gloves (EN 374) Suitable materials also with prolonged, direct contact (Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN 374): nitrile rubber (NBR) - 0.4 mm coating thickness Supplementary note: The specifications are based on tests, literature data and information of glove manufacturers or are derived from similar substances by analogy. Due to many conditions (e.g. temperature) it must be considered, that the practical usage of a chemical-protective glove in practice may be much shorter than the permeation time determined through testing. Manufacturer's directions for use should be observed because of great diversity of types.
Safety glasses with side-shields (frame goggles) (e.g. EN 166)
Respiratory protection in case of vapour/aerosol release. Particle filter with medium efficiency for solid and liquid particles (e.g. EN 143 or 149, Type P2 or FFP2)
Body protection must be chosen based on level of activity and exposure.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable.
No corrosive effect on metal.
See MSDS section 7 - Handling and storage.
strong acids, strong bases, strong oxidizing agents, reactive chemicals
No hazardous decomposition products known.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Pluriol® E 400 LS-FLEX?
The signal word is no signal word.
What is the physical form of Pluriol® E 400 LS-FLEX?
Pluriol® E 400 LS-FLEX is a liquid with clear color. It has mild, almost odourless odor.
What is Pluriol® E 400 LS-FLEX used for?
Raw material for the chemical-technical industry