Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Butac Base Thinner
- Product Code
- 1-10-00-01
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- not relevant (mixture)
Identified Uses
solvents, cleaning agent
Uses advised against
information on this property is not available
Manufacturers & Suppliers
Simfex International
manufacturer
44 avenue de la Marne, Bâtiment B, 59290 Wasquehal
+33 3 20 03 31 77
http://www.simfexint.com
Emergency Contacts
ORFILA
+33 (0)1 45 42 59 59
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Description of the mixture
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| n-butyl acetate EC: 204-658-1 | 123-86-4 | 50 - 75% | Yes |
| xylene EC: 215-535-7 | 1330-20-7 | 10 - 25% | Yes |
| ethyl acetate EC: 205-500-4 | 141-78-6 | 1 - 5% | Yes |
| acetone EC: 200-662-2 | 67-64-1 | 1 - 5% | Yes |
| butanone EC: 201-159-0 | 78-93-3 | 1 - 5% | Yes |
| butan-1-ol EC: 200-751-6 | 71-36-3 | 1 - 5% | Yes |
| Solvent naphtha (petroleum), light arom. EC: 265-199-0 | 64742-95-6 | 1 - 5% | Yes |
| 2-butoxyethanol EC: 203-905-0 | 111-76-2 | 1 - 5% | Yes |
| toluene EC: 203-625-9 | 108-88-3 | 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathing is irregular or stopped, immediately seek medical assistance and start first aid actions. In case of respiratory tract irritation, consult a physician. Provide fresh air.
Wash with plenty of soap and water.
Remove contact lenses, if present and easy to do. Continue rinsing. Irrigate copiously with clean, fresh water for at least 10 minutes, holding the eyelids apart.
Rinse mouth with water (only if the person is conscious). Do NOT induce vomiting.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
water spray, BC-powder, carbon dioxide (CO2)
water jet
In case of insufficient ventilation and/or in use, may form flammable/explosive vapour-air mixture. Solvent vapours are heavier than air and may spread along floors. Places which are not ventilated, e.g. unventilated below ground level areas such as trenches, conduits and shafts, are particularly prone to the presence of flammable substances or mixtures.
Co-ordinate firefighting measures to the fire surroundings. Fight fire with normal precautions from a reasonable distance.
Firefighter Protection
In case of fire and/or explosion do not breathe fumes.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove persons to safety.
Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.
Wipe up with absorbent material (e.g. cloth, fleece). Collect spillage (sawdust, kieselgur (diatomite), sand, universal binder).
Materials: cloth, fleece, sawdust, kieselgur (diatomite), sand, universal binder
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use local and general ventilation. Avoidance of ignition sources. Keep away from sources of ignition - No smoking. Take precautionary measures against static discharge. Use only in well-ventilated areas. Due to danger of explosion, prevent leakage of vapours into cellars, flues and ditches. Ground/bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting/equipment. Use only non-sparking tools.
Keep container tightly closed and in a well-ventilated place. Keep cool. Protect from sunlight.
Wash hands after use. Do not eat, drink and smoke in work areas. Remove contaminated clothing and protective equipment before entering eating areas. Never keep food or drink in the vicinity of chemicals. Never place chemicals in containers that are normally used for food or drink. Keep away from food, drink and animal feedingstuffs.
Keep away from sources of ignition - No smoking. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Take precautionary measures against static discharge.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
General ventilation.
Wear suitable gloves. Chemical protection gloves are suitable, which are tested according to EN 374. Check leak-tightness/impermeability prior to use. In the case of wanting to use the gloves again, clean them before taking off and air them well. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves.
Wear eye/face protection.
In case of inadequate ventilation wear respiratory protection.
Take recovery periods for skin regeneration. Preventive skin protection (barrier creams/ointments) is recommended. Wash hands thoroughly after handling.
Use appropriate container to avoid environmental contamination. Keep away from drains, surface and ground water.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
See below "Conditions to avoid".
The mixture contains reactive substance(s): risk of ignition if heated
No known hazardous reactions.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use explosion-proof electrical/ventilating/lighting/equipment. Use only non-sparking tools. Take precautionary measures against static discharge. strong shocks
oxidisers
Reasonably anticipated hazardous decomposition products produced as a result of use, storage, spill and heating are not known. Hazardous combustion products: see section 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Solvent reclamation/regeneration.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1993
- Shipping Name
- FLAMMABLE LIQUID, N.O.S.
- Transport Class
- 3
- Packing Group
- III
Provisions for dangerous goods (ADR) should be complied within the premises.
223, 274, 955
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Relevant provisions of the European Union (EU)
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Butac Base Thinner?
The signal word is warning.
What is the physical form of Butac Base Thinner?
Butac Base Thinner is a liquid with clear - colourless color. It has characteristic odor.
What is the solubility of Butac Base Thinner?
not determined
What is Butac Base Thinner used for?
solvents, cleaning agent
What are the hazard statements for Butac Base Thinner?
This substance has 4 hazard statements:
- H226: Flammable liquid and vapour.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
What is the melting point of Butac Base Thinner?
The melting point is not determined and the boiling point is 80 – 150 °C.