Bondupal Thinner BV 305

Provide fresh air. In case of accident or unwellness, seek medical advice immediately (show directions for use or safety data sheet if possible). Remove casualty to fresh air and keep warm and at rest. If breathing is irregular or stopped, administer artificial respiration.

Wash with plenty of water. Take off contaminated clothing and wash it before reuse. Immediately remove any contaminated clothing, shoes or stockings. After contact with skin, wash immediately with plenty of water and soap.

Rinse immediately carefully and thoroughly with eye-bath or water. In case of eye irritation consult an ophthalmologist.

Observe risk of aspiration if vomiting occurs. Rinse mouth immediately and drink plenty of water. If swallowed, rinse mouth with water (only if the person is conscious). Call a physician immediately. Put victim at rest, cover with a blanket and keep warm. Do NOT induce vomiting.

Carbon dioxide (CO2), Foam, Extinguishing powder. alcohol resistant foam, Carbon dioxide (CO2), Extinguishing powder, Water mist

Water. Full water jet

Flammable. Vapours can form explosive mixtures with air. Burning produces heavy smoke.

Use water spray jet to protect personnel and to cool endangered containers. Suppress gases/vapours/mists with water spray jet.

Remove all sources of ignition. Provide adequate ventilation. Do not breathe gas/fumes/vapour/spray. Avoid contact with skin, eyes and clothes. Use personal protection equipment. Keep away from sources of ignition - No smoking. Ventilate affected area. Avoid breathing dust/fume/gas/mist/vapours/spray.

Do not allow uncontrolled discharge of product into the environment. Danger of explosion

Collect in closed and suitable containers for disposal.

Materials: sand, diatomaceous earth, acid- or universal binding agents

Do not breathe gas/fumes/vapour/spray. Avoid contact with skin, eyes and clothes. Avoid: Inhalation of vapours or spray/mists, Inhalation of dust/particles. When using do not eat, drink or smoke. Never use pressure to empty container.

Keep/Store only in original container.

Remove contaminated, saturated clothing immediately. Draw up and observe skin protection programme. Wash hands and face before breaks and after work and take a shower if necessary. When using do not eat or drink.

Keep away from sources of heat (e.g. hot surfaces), sparks and open flames. Keep away from sources of ignition - No smoking. Take precautionary measures against static discharges.

If handled uncovered, arrangements with local exhaust ventilation have to be used. Do not breathe gas/fumes/vapour/spray. Provide adequate ventilation. If handled uncovered, arrangements with local exhaust ventilation should be used if possible. If technical exhaust or ventilation measures are not possible or insufficient, respiratory protection must be worn.

When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. The quality of the protective gloves resistant to chemicals must be chosen as a function of the specific working place concentration and quantity of hazardous substances. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. Wear suitable gloves. Replace when worn. Suitable material: Nitrril 0,35mm. Breakthrough time:: 480min. See information supplied by the manufacturer.

Wear eye protection/face protection.

In case of inadequate ventilation wear respiratory protection. Respiratory protection necessary at: exceeding exposure limit values. Use suitable breathing apparatus.

Wear suitable protective clothing.

Do not allow to enter into surface water or drains.

The product is stable under storage at normal ambient temperatures.

Flammable, Ignition hazard.

Exothermic reaction with: Oxidising agent, Strong acid, Strong alkali

Keep away from sources of heat (e.g. hot surfaces), sparks and open flames. Vapours can form explosive mixtures with air.

No information available.

In case of warming: Formation of: Hazardous decomposition products