Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BAEROCID L-1 A
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Manufacture of plastics products, Polymer additive, Lubricant and release agent
Manufacturers & Suppliers
Baerlocher GmbH
manufacturer
Freisinger Strasse 1, 85716 Unterschleissheim - Germany
+49-89/14373-0
Emergency Contacts
Emergency Contact
+44(0)1235 239670
0 - 24 h
Emergency Contact
+49-591/9132-0
0 - 24 h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Fatty acid C16 - C18
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Fatty acid C16 - C18 | --- | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air.
Cool melted product on skin with plenty of water. Do not remove solidified product. Consult a doctor and show this safety datasheet. Take off all contaminated clothing immediately.
Rinse immediately with plenty of water and seek medical advice.
Clean mouth with water and drink afterwards plenty of water.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, Foam, Carbon dioxide (CO2)
High volume water jet
None known.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not flush into surface water or sanitary sewer system. Avoid subsoil penetration.
Soak up with inert absorbent material
Materials: sand, silica gel, acid binder, universal binder, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Take precautionary measures against static discharges. Keep away from sources of ignition - No smoking.
Store in original container. Keep in a dry place.
Handle in accordance with good industrial hygiene and safety practice.
Take precautionary measures against static discharges. Keep away from sources of ignition - No smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Local exhaust
protective gloves acc. to EN 374, e.g. neoprene, thickness: min. 0,7 mm
Safety glasses
Breathing apparatus only if aerosol or dust is formed.
Chemical resistant apron Impervious clothing
Do not flush into surface water or sanitary sewer system. Avoid subsoil penetration.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if stored normally.
Stable at normal ambient temperature and pressure.
The product is combustible.
Sources of ignition
Not applicable
No decomposition if used as directed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Take to an established disposal company according to the waste regulations.
Take to an established disposal company according to the waste regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BAEROCID L-1 A?
The signal word is no signal word.
What is the physical form of BAEROCID L-1 A?
BAEROCID L-1 A is a liquid appearing as liquid with colourless color. It has characteristic odor.
What is BAEROCID L-1 A used for?
Manufacture of plastics products, Polymer additive, Lubricant and release agent
What is the melting point of BAEROCID L-1 A?
The melting point is 56 - 60 °C .