Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- KOFA STABIL
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Preservatives for animal feed
Uses advised against
N.A.
Manufacturers & Suppliers
ADDCON GmbH
global supplier
Parsevalstr. 6 06749 Bitterfeld-Wolfen – Germany
www.addcon.com
Emergency Contacts
ADDCON
+49 (0) 3493 96787 00
office hours: Mo – Fr; 8:00 a.m. – 4:00 p.m.
EN, DE
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove casualty to fresh air and keep warm and at rest.
Symptoms: Irritation by aspiration
Immediately take off all contaminated clothing. After contact with skin, wash immediately with soap and plenty of water.
Symptoms: Contact may cause transient irritation. In case of persistent skin irritation.
Irrigate eyes with copious amounts of water for at least 10-15 min, holding eyelids apart to ensure thorough rinsing. Protect uninjured eye.
Symptoms: Contact may cause irritation. If irritation, blurred vision or swelling occurs and persists.
Get medical attention showing the SDS and hazard labelling.
Symptoms: Swallowing large amounts may be harmful to health.
Immediate Medical Attention
In case of accident or unwellness, seek medical advice immediately (show directions for use or safety data sheet if possible). Ask for medical advice (eyes contact). If irritation, blurred vision or swelling occurs and persists, obtain medical advice from a specialist (eyes contact). In case of persistent skin irritation consult a doctor (skin contact). Get medical attention showing the SDS and hazard labelling (ingestion).
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2 or Dry chemical fire extinguisher. Water Spray
None in particular.
Move undamaged containers from immediate hazard area if it can be done safely.
Firefighter Protection
Wear suitable protective clothing (helmet, protective clothings, goggles, fire resistant gloves, boots) and protect respiratory organs (self contained breathing apparatus).
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove persons to safety.
Do not allow to enter into soil/subsoil. Do not allow to enter into surface water or drains. In case of gas escape or of entry into waterways, soil or drains, inform the responsible authorities.
Vacuum or sweep up material and place in a designated, labelled waste container. Clean up affected area with a large amount of water.
Materials: absorbing material, organic, sand, water
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Don't use empty container before they have been cleaned. Before making transfer operations, assure that there aren't any incompatible material residuals in the containers.
Contaminated clothing should be changed before entering eating areas. Do not eat or drink while working.
Keep away from sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
N.A.
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. Glove suitability and breakthrough time will differ depending on the specific use conditions. Contact the glove manufacturer for specific advice on glove selection and breakthrough times for your use conditions. Suitable chemical resistant safety gloves (EN 374) also with prolonged, direct contact and other. Recommended material: > 8 hours (breakthrough time): butyl rubber, neoprene, Viton, PVC. Replace damaged gloves.
Safety glasses (Conforming to UNI EN 166)
Depending on the potential for exposure, select respiratory protective equipment suitable for the specific conditions of use and in compliance with current legislation. A NIOSH/MSHA approved air purifying dust or mist respirator or European Standard EN 149.
Use clothing that provides comprehensive protection to the skin, e.g. cotton, rubber, PVC or viton.
N.A.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions
Stable under normal conditions
None in particular.
Exposure to sources of heat, open store under wet conditions
Acids, Alkali, Oxidants. Moisture
COx CaOx
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for KOFA STABIL?
The signal word is warning.
What is the physical form of KOFA STABIL?
KOFA STABIL is a liquid with yellowish color. It has odourless odor.
What is KOFA STABIL used for?
Preservatives for animal feed
What are the hazard statements for KOFA STABIL?
This substance has 1 hazard statement:
- H319: Causes serious eye irritation.
What is the melting point of KOFA STABIL?
The melting point is - 15 °C and the boiling point is > 150 °C.