Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Berryman TOTAL FUEL STABILIZER
- Product Code
- 0408, 0416
- Synonyms
- blend "TFS"
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
gasoline and diesel fuel stabilizer
Manufacturers & Suppliers
Berryman Products, Inc.
manufacturer
3800 E Randol Mill Rd, Arlington, TX 76011
(800) 433-1704
http://www.BerrymanProducts.com
Emergency Contacts
InfoTrac, Inc.
(800) 535-5053
InfoTrac, Inc.
(352) 323-3500
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Petroleum Distillates | 64742-88-7 | 95 - 99% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable. If experiencing respiratory symptoms or if breathing is difficult, administer oxygen and call poison control center, hospital emergency room, or doctor.
Immediately take off all contaminated clothing. Rinse skin with soap and water or shower.
Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. If eye irritation persists, get medical advice/attention.
Immediately call poison control center, hospital emergency room, or doctor. Do NOT induce vomiting. Drink 1-2 glasses of milk or water.
Immediate Medical Attention
In the event of shortness of breath, difficulty breathing, or spontaneous vomiting, seek immediate medical attention.
Medical Treatment
If performing lavage, endotracheal and/or esophageal control is recommended. If spontaneous vomiting occurs, keep head below hips to avoid aspiration.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
water fog, dry chemical, alcohol-resistant foam, or carbon dioxide
water jet/spray (may cause product to float to surface and reignite)
Flammable liquid and vapor. Vapors heavier than air. Product may vent, rupture, or explode violently at elevated temperatures.
Remove product from area if safe to do so. Use water spray to cool nearby containers.
Firefighter Protection
Firefighters should employ SCBA and full protective gear, including shield
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep away from heat, sparks, open flames, and hot surfaces. No smoking. Take precautionary measures against static discharge. Ground/bond container and receiving equipment. Use explosion-proof electrical, ventilation, and lighting equipment. Use only non-sparking tools. Avoid breathing fumes, gas, mist, vapor, or spray. Wash thoroughly with soap and water after handling. Use only outdoors or in a well-ventilated area.
Remove source from area if safe to do so. Use granular sorbent, gel sorbent, vermiculite, cat litter, dirt/earth, pads/rolls, or pillows to absorb spilled material. Other useful supplies may include a mop and mop bucket. Remediate affected area as necessary.
Keep upwind from spill. Remove source from area if safe to do so. Use a mop and mop bucket or explosion-proof transfer equipment to recover spilled material. Use granular sorbent, gel sorbent, vermiculite, cat litter, dirt/earth, pads/rolls, or pillows to absorb residual material. Remediate affected area as necessary.
Avoid release to the environment.
Use granular sorbent, gel sorbent, vermiculite, cat litter, dirt/earth, pads/rolls, or pillows to absorb spilled material. Use a mop and mop bucket or explosion-proof transfer equipment to recover spilled material.
Materials: granular sorbent, gel sorbent, vermiculite, cat litter, dirt/earth, pads/rolls, pillows, mop and mop bucket
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid breathing fumes, gas, mist, vapor, or spray. Use only outdoors or in a well-ventilated area. Wear protective gloves, protective clothing, and eye or face protection. Wash thoroughly with soap and water after handling.
Flammable liquid and vapor. Store in a well-ventilated place. Keep container tightly closed. Keep cool. Keep out of reach of children. Store locked-up and in accordance with NFPA flammable liquid classification II recommendations.
Wash thoroughly with soap and water after handling.
Keep away from heat, sparks, open flames, and hot surfaces. No smoking. Take precautionary measures against static discharge. Ground/bond container and receiving equipment.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of use.
not expected
none known
Keep away from heat, sparks, open flames, and hot surfaces. No smoking. If practical, avoid temperatures exceeding flash point.
strong acids; oxidizers; reducing agents
none known
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
Aquatic Toxicity
Persistence and Degradability
Bioaccumulative Potential
Mobility in Soils
Results of PBT and vPvB Assessment
The substance is not considered to be persistent, bioaccumulative, or toxic (PBT), nor is it considered to be very persistent or very bioaccumulative (vPvB).
Other Adverse Effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1993
- Shipping Name
- Flammable Liquids, n.o.s.
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Berryman TOTAL FUEL STABILIZER known by?
Berryman TOTAL FUEL STABILIZER is also known as: blend "TFS"
What is the hazard signal word for Berryman TOTAL FUEL STABILIZER?
The signal word is danger.
What is the physical form of Berryman TOTAL FUEL STABILIZER?
Berryman TOTAL FUEL STABILIZER is a liquid appearing as red . It has mild, solvent odor.
What is Berryman TOTAL FUEL STABILIZER used for?
gasoline and diesel fuel stabilizer
What are the hazard statements for Berryman TOTAL FUEL STABILIZER?
This substance has 9 hazard statements:
- H226: Flammable liquid and vapor.
- H304: May be fatal if swallowed and enters airways.
- H312: Harmful in contact with skin.
- H320: Causes eye irritation.
- H335: May cause respiratory irritation.
- H336: May cause drowsiness or dizziness.
- H401: Toxic to aquatic life.
- H412: Harmful to aquatic life with long-lasting effects.
- Specific treatment (see supplemental first aid instructions this label/document).