Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MARLOX MO 154
- Chemical Name
- Alcohols, C12-14 (even numbered), ethoxylated propoxylated (>= 2.5 moles EO/PO)
Regulatory Identifiers
- CAS Number
- 68439-51-0 Check regulations →
Identified Uses
Industrial use, raw material for washing and cleaning agents, raw material for textile auxiliary agents, surface-active substance, Defoamer
Manufacturers & Suppliers
SLOVECA, Sasol Slovakia, spol. s r.o.
Mostová 2 811 02 Bratislava Slovak Republic
+421 2 54430219
Carl Roth GmbH + Co KG
Schoemperlenstr. 3-5 76185 Karlsruhe, Germany
+49 721 5606 0
Emergency Contacts
Emergency Contact
+44 1235 239670
Emergency Contact
+44 1235 239671
Emergency Contact
+1 215 207 0061
Emergency Contact
+65 3158 1074
Emergency Contact
+44 1865 407333
EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Alcohols, C12-14, ethoxylated, propoxylated (>= 2.5 moles EO/PO) EC: 931-986-9 | 68439-51-0 | 90 - 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove from exposure, lie down. If breathing is irregular or stopped, administer artificial respiration. Monitor breathing, give oxygen if necessary. Consult a physician.
Wash off with soap and water.
Rinse with plenty of water.
Consult a physician if necessary. Rinse mouth.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water, Foam, Dry powder, Carbon dioxide (CO2)
Dangerous gases or fumes may occur in case of fire.
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Firefighter Protection
Wear self-contained breathing apparatus for firefighting if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid subsoil penetration. Do not flush into surface water or sanitary sewer system.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No special technical protective measures required.
No special storage conditions required. loading temperature 40 °C Protect from frost, heat and sunlight.
Normal measures for preventive fire protection.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Material: butyl-rubber, Break through time: >= 480 min, Glove thickness: >= 0.7 mm. Material: Nitrile rubber, Break through time: >= 30 min, Glove thickness: >= 0.4 mm. Observe instructions regarding permeability and breakthrough time provided by the supplier of the gloves. Take into consideration specific local conditions, danger of cuts, abrasion, and contact time. Durability of chemical resistant protective glove can be notably shorter than break through time measured according to EN 374 due to numerous outside influences.
Safety glasses
No personal respiratory protective equipment normally required. In inadequately ventilated areas, where workplace limits are exceeded, where unpleasant odours exist or where aerosols are in use, or smoke and mist occur, use self-contained breathing apparatus or breathing apparatus with a type A filter or appropriate combined filter (e.g. A-P2 or ABEK-P2), in compliance with EN 141.
Wear suitable protective equipment.
Avoid subsoil penetration. Do not flush into surface water or sanitary sewer system.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable.
No dangerous reaction known under conditions of normal use.
None known.
Direct heating, dirt, chemical contamination, sunlight, UV or ionising radiation.
None known.
No decomposition if stored normally. No decomposition if used as directed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MARLOX MO 154?
The signal word is no signal word.
What is the physical form of MARLOX MO 154?
MARLOX MO 154 is a liquid; 20 °c; 1,013 hpa appearing as liquid with colorless to yellow color. It has mild odor.
What is MARLOX MO 154 used for?
Industrial use, raw material for washing and cleaning agents, raw material for textile auxiliary agents, surface-active substance, Defoamer
What are the hazard statements for MARLOX MO 154?
This substance has 1 hazard statement:
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of MARLOX MO 154?
The melting point is ca. -7 °C and the boiling point is No data available.