Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Ecorol 10/98, Ecorol 10/99
Regulatory Identifiers
- CAS Number
- 112-30-1 Check regulations →
- EC Number
- 203-956-9 Check regulations →
- REACH No.
- 01-2119480407-35-0002
Identified Uses
Lubricant, Initial product for chemical reactions, Agricultural chemicals, Paper defoamer, Textile defoamer, Cleaning material/ Detergent, Cosmetic auxiliary, Organic solvent
Manufacturers & Suppliers
Ecogreen Oleochemicals GmbH
Brambacher Weg 1, D-06861 Dessau-Rosslau, Germany
++49 / (0)34901 / 5484-60
PT Ecogreen Oleochemicals - Batam Plant
manufacturer
JI. Pelabuhan Kav. 1 Kabil, Batam Island 29467, Indonesia
++62 / 778 / 711002
Emergency Contacts
Emergency Contact
++49 / (0)34901 / 898 - 0
National Poisons Information Centre
+353 (1) 809 2166
8.00 a.m. to 10.00 p.m. 7 days a week
Healthcare Professionals
+353 (1) 809 2566
24 hour service
NHS 111
111
NHS 24
111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 1-Decanol EC: 203-956-9 | 112-30-1 | --- | No |
The product does not contain any substances of very high concern (SVHC).
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
If skin irritation continues, consult a doctor.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Rinse out mouth and then drink plenty of water.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO₂ powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Water with full jet
No further relevant information available.
Firefighter Protection
No special measures required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow to penetrate the ground/soil. Do not allow to enter sewers/ surface or ground water.
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from ignition sources.
Keep receptacle tightly sealed. When storing in tanks, cover with layer of nitrogen-protective gas.
Keep away from ignition sources.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see section 7.
Protective gloves. Material of gloves: Nitrile rubber. Penetration time of glove material: Nitrile rubber, Layer thickness: 0.10 mm, Penetration time: ≥ 10 min and <30 min (Level 1). Nitrile rubber, Layer thickness: 0.40 mm, Penetration time: > 480 min (Level 6). For the permanent contact in work areas without heightened risk of injury (e.g. Laboratory) gloves made of the following material are suitable: Nitrile rubber (i.e. KCL 730-Nitrile glove Camatril®). As protection from splashes gloves made of the following materials are suitable: Nitrile rubber (i.e. KCL 740 nitrile disposable gloves Dermatril®)
Safety glasses
Use respiratory protective device against the effects of fumes/aerosol. (Filter A-(P2)). Recommended filter device for short term use: Combination filter A-P2
Protective work clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
Reacts with acids, alkalis and oxidising agents.
No further relevant information available.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed together with household garbage.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Void
- Shipping Name
- Void
- Transport Class
- Class Void
- Packing Group
- Void
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Ecorol 10/98, Ecorol 10/99?
The signal word is warning.
What is the physical form of Ecorol 10/98, Ecorol 10/99?
Ecorol 10/98, Ecorol 10/99 is a liquid appearing as colourless with colourless color. It has specific type odor.
What is Ecorol 10/98, Ecorol 10/99 used for?
Lubricant, Initial product for chemical reactions, Agricultural chemicals, Paper defoamer, Textile defoamer, Cleaning material/ Detergent, Cosmetic auxiliary, Organic solvent
What are the hazard statements for Ecorol 10/98, Ecorol 10/99?
This substance has 2 hazard statements:
- H319: Causes serious eye irritation.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of Ecorol 10/98, Ecorol 10/99?
The melting point is 6.4 °C and the boiling point is 232.9 °C.