Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Ecorol 12/98, 12/99
- Chemical Name
- 1-Dodecanol
Regulatory Identifiers
- CAS Number
- 112-53-8 Check regulations →
- EC Number
- 203-982-0 Check regulations →
- REACH No.
- 01-2119485976-15-0005
Identified Uses
Initial product for chemical reactions Organic solvent
Manufacturers & Suppliers
Ecogreen Oleochemicals GmbH
national supplier
Brambacher Weg 1, D-06861 Dessau-Rosslau, Germany
+49/34901/5484-60
PT Ecogreen Oleochemicals - Batam Plant
manufacturer
JI. Pelabuhan Kav. 1 Kabil, Batam Island 29435, Indonesia
+62-778-711002
Emergency Contacts
Emergency Contact
++49/(0)34901/898-0
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 1-Dodecanol EC: 203-982-0 | 112-53-8 | --- | No |
- SVHC The product does not contain any substances of very high concern (SVHC).
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist. In case of unconsciousness place patient stably in side position for transportation.
Wash with water and soap and rinse thoroughly.
Symptoms: Skin irritation
Rinse opened eye for several minutes under running water.
Rinse out mouth and then drink plenty of water.
Immediate Medical Attention
Consult doctor if symptoms persist.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO₂, powder or water spray. Fight larger fires with water spray or alcohol resistant foam. Use fire extinguishing methods suitable to surrounding conditions.
Water with full jet
Use fire extinguishing methods suitable to surrounding conditions.
Firefighter Protection
wear suitable protective clothing in dangerous zone
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid contact with the eyes and skin.
Inform respective authorities in case of seepage into water course or sewage system. Do not allow to enter sewers/ surface or ground water.
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace. Avoiding touch with eyes, skin and clothes. Keep away from ignition sources.
Keep receptacles tightly sealed. Store receptacle in a well ventilated area. Store in dry conditions.
Keep away from ignition sources.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Material of gloves: Nitrile rubber, NBR (i.e. KCL 731-Nitril glove Camatril®), Fluorocarbon rubber (Viton), long-time (i.e. KCL 890-Fluorkautschuk-Vitoject®), Butyl rubber, BR (i.e. KCL 897, Butyl-glove Butoject®). Penetration time of glove material: The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed. Glove material: Nitrile rubber, layer strength: 0.40 mm, penetration time: > 480 min (level 6). At full contact: Glove material: Butyl rubber. Layer strength: 0.30 mm. Lenetration time: > 480 min (Level 6).
Tightly sealed goggles
Use suitable respiratory protective device in case of insufficient ventilation. Use respiratory protective device against the effects of fumes/aerosol. (Filter A-(P2)). Recommended filter device for short term use: Combination filter A-P2
Protective work clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No dangerous reactions known.
No decomposition if used according to specifications.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
Toxicity
Persistence and degradability
Bioaccumulative potential
Mobility in soil
Results of PBT and vPvB assessment
Endocrine disrupting properties
Other adverse effects
12.1 Toxicity
12.1 Toxicity
Results of PBT and vPvB assessment
The substance is not classified as PBT or vPvB.
Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (1-Dodecanol)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Ecorol 12/98, 12/99?
The signal word is warning.
What is the physical form of Ecorol 12/98, 12/99?
Ecorol 12/98, 12/99 is a liquid with colourless color. It has specific type odor.
What is Ecorol 12/98, 12/99 used for?
Initial product for chemical reactions Organic solvent
What are the hazard statements for Ecorol 12/98, 12/99?
This substance has 2 hazard statements:
- H319: Causes serious eye irritation.
- H400: Very toxic to aquatic life.
What is the melting point of Ecorol 12/98, 12/99?
The melting point is 24°C and the boiling point is 254 - 259°C.