Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- HYDROWAX 540
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Raw material for industry
Manufacturers & Suppliers
Hywax GmbH
manufacturer
Worthdamm 13 - 27, 20457 Hamburg, Germany
+49-40-78115-0
Emergency Contacts
Emergency Contact
+49-171-429-3850
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
dispersion
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2,2'-iminodiethanol EC: 203-868-0 | 111-42-2 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Do not breathe vapours or spray mist. If symptoms persist, call a physician.
Take off contaminated clothing and shoes immediately. Wash off with soap and water.
Protect unharmed eye. Remove contact lenses. Flush eyes with water as a precaution. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist.
If accidentally swallowed obtain immediate medical attention. If symptoms persist, call a physician. Clean mouth with water and drink afterwards plenty of water.
Immediate Medical Attention
If accidentally swallowed obtain immediate medical attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide (CO2), Dry powder, Foam, Sand, Water mist, Water spray jet
High volume water jet
Do not allow run-off from fire fighting to enter drains or water courses.
Standard procedure for chemical fires. Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Firefighter Protection
Wear self-contained breathing apparatus for firefighting if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid subsoil penetration. Do not allow contact with soil, surface or ground water. If the product contaminates rivers and lakes or drains inform respective authorities.
Soak up with inert absorbent material.
Materials: sand, silica gel, acid binder, universal binder, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid formation of aerosol. No special handling advice required.
Keep containers tightly closed in a dry, cool and well-ventilated place. Keep away from heat and sources of ignition. Protect from frost, heat and sunlight.
Keep away from open flames, hot surfaces and sources of ignition. Normal measures for preventive fire protection.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Material: Chemical resistant gloves made of butyl rubber or nitrile rubber category III according to EN 374. Take note of the information given by the producer concerning permeability and break through times, and of special workplace conditions (mechanical strain, duration of contact).
Safety glasses with side-shields conforming to EN166
Breathing apparatus needed only when aerosol or mist is formed. Respiratory protection complying with EN 143.
Long sleeved clothing
Avoid subsoil penetration. Do not allow contact with soil, surface or ground water. If the product contaminates rivers and lakes or drains inform respective authorities.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if stored and applied as directed.
Stable under recommended storage conditions.
None known.
Protect from frost, heat and sunlight.
Oxidizing agents; Acids and bases
No decomposition if stored and applied as directed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
If recycling is not practicable, dispose of in compliance with local regulations.
If recycling is not practicable, dispose of in compliance with local regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for HYDROWAX 540?
The signal word is no signal word.
What is the physical form of HYDROWAX 540?
HYDROWAX 540 is a liquid with off-white color. It has ammoniacal odor.
What is the solubility of HYDROWAX 540?
not determined
What is HYDROWAX 540 used for?
Raw material for industry
What is the melting point of HYDROWAX 540?
The melting point is 0 - 4 °C and the boiling point is ca. 100 °C.