Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- HYDREX[TM/MC] AW 100
- Product Code
- HDXAW10IBC, HDXAW10P5R, HDXAW10P20, HDXAW10DRR, HDXAW10DRM, HDXAW10DCT, HDXAW10, HDXAW10BLK
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
These products are designed for use as heavy duty hydraulic power transmission fluids and for lubrication where good antiwear and anti-oxidation properties are required. They would typically be used in high-pressure hydraulic systems, machine tools, presses, compressors, pumps, gear sets, and centralized bearing lubrication systems.
Manufacturers & Suppliers
Petro-Canada America Lubricants LLC
manufacturer
2828 N. Harwood St., Suite 1300 Dallas TX 75201 United States
1-214-871-3555
Emergency Contacts
CHEMTREC
1-800-424-9300
Poison Control Centre
Consult local telephone directory for emergency number(s).
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Lubricating oils (petroleum), C20-50, hy-<br>drotreated neutral oil-based, high-<br>viscosity;Baseoil — unspecified | 72623-85-9 | 90 - 100% | No |
| Distillates (petroleum), hydrotreated heavy<br>paraffinic;Baseoil —unspecified | 64742-54-7 | 70 - 90% | No |
| Lubricating oils (petroleum), C20-50, hy-<br>drotreated neutral oil-based; Baseoil —<br>unspecified | 72623-87-1 | 5 - 10% | No |
| 2,6-di-tert-butylphenol | 128-39-2 | 0.1 - 1% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. Artificial respiration and/or oxygen may be necessary.
In case of contact, immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash skin thoroughly with soap and water or use recognized skin cleanser. Wash clothing before reuse.
Remove contact lenses. Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
Rinse mouth with water. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
Seek medical advice. Obtain medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
No information available.
Cool closed containers exposed to fire with water spray.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate personnel to safe areas. Mark the contaminated area with signs and prevent access to unauthorized personnel.
Do not allow uncontrolled discharge of product into the environment.
Soak up with inert absorbent material.
Materials: inert absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area. Use only with adequate ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Avoid contact with skin, eyes and clothing. Do not ingest. Keep away from heat and sources of ignition. Keep container closed when not in use.
Store in original container. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Keep in a dry, cool and well-ventilated place. Keep in properly labelled containers. To maintain product quality, do not store in heat or direct sunlight.
Smoking, eating and drinking should be prohibited in the application area.
Keep away from heat and sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Hazardous polymerisation does not occur.
No data available
Reactive with oxidising agents and reducing agents.
May release COx, NOx, SOx, POx, H2S, metal oxides, methacrylate monomers, smoke and irritating vapours when heated to decomposition.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for HYDREX[TM/MC] AW 100?
The signal word is no signal word.
What is the physical form of HYDREX[TM/MC] AW 100?
HYDREX[TM/MC] AW 100 is a liquid appearing as viscous liquid with pale, straw-yellow. color. It has mild petroleum oil like. odor.
What is HYDREX[TM/MC] AW 100 used for?
These products are designed for use as heavy duty hydraulic power transmission fluids and for lubrication where good antiwear and anti-oxidation properties are required. They would typically be used in high-pressure hydraulic systems, machine tools, presses, compressors, pumps, gear sets, and centralized bearing lubrication systems.
What are the hazard statements for HYDREX[TM/MC] AW 100?
This substance has 1 hazard statement:
- Not a hazardous substance or mixture.