Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Bentazon NA techn.600 g/l
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
crop protection product, herbicide
Uses advised against
Uses other than recommended
Manufacturers & Suppliers
BASF Canada Inc.
manufacturer
5025 Creekbank Road, Building A, Floor 2, Mississauga, ON, L4W 0B6, CANADA
+1 289 360-1300
Emergency Contacts
CHEMTREC
1-800-424-9300
BASF HOTLINE
(800) 454-COPE (2673)
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| bentazon | 50723-80-3 | 53% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Keep patient calm, remove to fresh air, seek medical attention.
Wash thoroughly with soap and water
Wash affected eyes for at least 15 minutes under running water with eyelids held open, consult an eye specialist.
Immediately rinse mouth and then drink 200-300 ml of water, seek medical attention.
Medical Treatment
Treat according to symptoms (decontamination, vital functions)
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
water spray, foam, dry powder, carbon dioxide
carbon monoxide, carbon dioxide, nitrogen oxides, sulfur oxides. The substances/groups of substances mentioned can be released in case of fire.
Keep containers cool by spraying with water if exposed to fire.
Firefighter Protection
Wear self-contained breathing apparatus and chemical-protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not breathe vapour/spray. Use personal protective clothing. Avoid contact with the skin, eyes and clothing.
Do not discharge into drains/surface waters/groundwater. Do not discharge into the subsoil/soil.
Pick up with suitable absorbent material. Place into suitable containers for reuse or disposal in a licensed facility. After decontamination, spill area can be washed with water. Collect wash water for approved disposal.
Materials: suitable absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No special measures necessary if stored and handled correctly. Ensure thorough ventilation of stores and work areas. When using do not eat, drink or smoke. Hands and/or face should be washed before breaks and at the end of the shift.
Segregate from foods and animal feeds. Keep away from heat. Protect from direct sunlight.
When using do not eat, drink or smoke. Hands and/or face should be washed before breaks and at the end of the shift.
No special precautions necessary. The substance/product is non-combustible.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Chemical resistant protective gloves, Protective glove selection must be based on the user's assessment of the workplace hazards.
Safety glasses with side-shields. Wear face shield or tightly fitting safety goggles (chemical goggles) if splashing hazard exists.
Wear respiratory protection if ventilation is inadequate. Wear a NIOSH-certified (or equivalent) TC23C Chemical/Mechanical type filter system to remove a combination of particles, gas and vapours. For situations where the airborne concentrations may exceed the level for which an air purifying respirator is effective, or where the levels are unknown or Immediately Dangerous to Life or Health (IDLH), use NIOSH-certified full facepiece pressure demand self-contained breathing apparatus (SCBA) or a full facepiece pressure demand supplied-air respirator (SAR) with escape provisions.
Body protection must be chosen depending on activity and possible exposure, e.g. head protection, apron, protective boots, chemical-protection suit.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable if stored and handled as prescribed/indicated.
No hazardous reactions if stored and handled as prescribed/indicated. Oxidizing properties: Based on its structural properties the product is not classified as oxidizing.
No hazardous reactions if stored and handled as prescribed/indicated.
Avoid all sources of ignition: heat, sparks, open flame. Avoid prolonged storage. Avoid electro-static discharge. Avoid contamination. Avoid prolonged exposure to extreme heat. Avoid extreme temperatures.
strong acids, strong bases, strong oxidizing agents
No hazardous decomposition products if stored and handled as prescribed/indicated., Prolonged thermal loading can result in products of degradation being given off.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
See product label for disposal and recycling instructions.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (contains 3-ISOPROPYL-1H-2,1,3-BENZOTHIAZIN-4(3H)-ONE 2,2-DIOXIDE, SODIUM SALT)
- Transport Class
- 9
- Packing Group
- III
2.10.2.7
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Registration status: Crop Protection: DSL, CA - released / exempt
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Bentazon NA techn.600 g/l?
The signal word is warning.
What is the physical form of Bentazon NA techn.600 g/l?
Bentazon NA techn.600 g/l is a liquid with yellow to red to brown color. It has odourless odor.
What is Bentazon NA techn.600 g/l used for?
crop protection product, herbicide
What are the hazard statements for Bentazon NA techn.600 g/l?
This substance has 6 hazard statements:
- H302: Harmful if swallowed.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H361: Suspected of damaging the unborn child.
- H400: Very toxic to aquatic life.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of Bentazon NA techn.600 g/l?
The melting point is approx. 0 °C and the boiling point is approx. 100 °C.