Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 3M(TM) Cavilon(TM) No Sting Barrier Film with Foam Applicator (IO) 3343, 3344, 3345, 3343E, 3344E, 3345E, 3343P, and 3345P
- Product Code
- 3343, 3344, 3345, 3343E, 3344E, 3345E, 3343P, 3345P
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Skin protectant barrier film.
Manufacturers & Suppliers
3M
manufacturer
3M Center, St. Paul, MN 55144-1000
Emergency Contacts
Emergency Contact
1-800-364-3577
24 hours
Emergency Contact
(651) 737-6501
24 hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Foam applicator | --- | 92 - 96% | No |
| Hexamethyldisiloxane | 107-46-0 | 2 - 8% | No |
| Isooctane | 540-84-1 | 0.1 - 3% | No |
| Acrylate Terpolymer | --- | 0.1 - 1% | No |
| Polyphenylmethylsiloxane Copolymer | 73559-47-4 | 0.5% | No |
Notes
Liquid is saturated onto foam applicator. There is no free-flowing liquid.
First Aid Measures
Emergency procedures for chemical exposure incidents
No need for first aid is anticipated.
No need for first aid is anticipated.
Flush eyes with large amounts of water. If signs/symptoms persist, get medical attention.
No need for first aid is anticipated.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use fire extinguishers with class B extinguishing agents (e.g., dry chemical, carbon dioxide).
Flammable solid. The liquid absorbed onto the foam applicator has a flash point of 30 degrees F.
Wear full protective equipment (Bunker Gear) and a self-contained breathing apparatus (SCBA).
Firefighter Protection
Wear full protective equipment (Bunker Gear) and a self-contained breathing apparatus (SCBA).
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ventilate the area with fresh air. Collect as much of the spilled material as possible using non-sparking tools. Clean up residue. Place in a metal container approved for transportation by appropriate authorities. Seal the container. Dispose of collected material as soon as possible.
Collect as much of the spilled material as possible using non-sparking tools. Clean up residue.
Related Products
Similar products with comparable safety profiles
3M™ Ioban™ 2 Antimicrobial Incise Drapes 6035, 6040, 6048, 6050, 6051, 6635, 6640, 6648, 6650 and 6651
---
3M Spray 74 Foam Adhesive
---
3M Brand Fire Barrier CP-25WB+
---
3M™ Super 77™ Multipurpose Adhesive
---
3M™ Polyether Adhesive - New Formulation
---
3M 51815, 51816, 51818 Fast Cut Plus Extreme
---
7423/7423M 3M™ ESPE™ SCOTCHBOND™ ETCHANT GEL
---
3M 08080 Auto Adhesive Aerosol
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Contents may be under pressure, open carefully. Keep away from heat, sparks, open flame, pilot lights and other sources of ignition. No smoking while handling this material. Keep out of the reach of children. Avoid contact with oxidizing agents.
Store away from acids. Store away from heat. Store out of direct sunlight. Keep container in well-ventilated area. Store away from oxidizing agents.
Keep away from heat, sparks, open flame, pilot lights and other sources of ignition. No smoking while handling this material.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
The data for this section has not been processed yet.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable.
Hazardous polymerization will not occur.
Heat; Sparks and/or flames
Strong oxidizing agents
Carbon monoxide, Carbon dioxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 3M(TM) Cavilon(TM) No Sting Barrier Film with Foam Applicator (IO) 3343, 3344, 3345, 3343E, 3344E, 3345E, 3343P, and 3345P?
The signal word is danger.
What is the physical form of 3M(TM) Cavilon(TM) No Sting Barrier Film with Foam Applicator (IO) 3343, 3344, 3345, 3343E, 3344E, 3345E, 3343P, and 3345P?
3M(TM) Cavilon(TM) No Sting Barrier Film with Foam Applicator (IO) 3343, 3344, 3345, 3343E, 3344E, 3345E, 3343P, and 3345P is a fluid on foam applicator or wipe appearing as foam applicator or wipe with clear, odorless liquid with clear color. It has odorless odor.
What is 3M(TM) Cavilon(TM) No Sting Barrier Film with Foam Applicator (IO) 3343, 3344, 3345, 3343E, 3344E, 3345E, 3343P, and 3345P used for?
Skin protectant barrier film.
What are the hazard statements for 3M(TM) Cavilon(TM) No Sting Barrier Film with Foam Applicator (IO) 3343, 3344, 3345, 3343E, 3344E, 3345E, 3343P, and 3345P?
This substance has 1 hazard statement:
- H228: Flammable solid
What is the melting point of 3M(TM) Cavilon(TM) No Sting Barrier Film with Foam Applicator (IO) 3343, 3344, 3345, 3343E, 3344E, 3345E, 3343P, and 3345P?
The melting point is No Data Available and the boiling point is 210 °F.