Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Buffer Solution, pH 4.00, Color-Coded Red
- Product Code
- SB101-4, SB101-20, SB101-500
- Synonyms
- (Certified)
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Laboratory chemicals.
Uses advised against
No Information available
Manufacturers & Suppliers
Fisher Scientific
manufacturer
One Reagent Lane, Fair Lawn, NJ 07410
(201) 796-7100
Emergency Contacts
CHEMTREC®
800-424-9300
CHEMTREC®
001-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Water | 7732-18-5 | 98.91% | No |
| 1,2-Benzenedicarboxylic acid, monopotassium salt | 877-24-7 | 1% | No |
| Formaldehyde | 50-00-0 | 0.05% | No |
| Methyl alcohol | 67-56-1 | 0.02% | No |
| Fluorescein, 2',4',5',7'-tetraiodo, disodium salt | 16423-68-0 | 0.02% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If breathing is difficult, give oxygen. Get medical attention immediately if symptoms occur.
Wash off immediately with plenty of water for at least 15 minutes. Get medical attention immediately if symptoms occur.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Obtain medical attention.
Do not induce vomiting. Obtain medical attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Substance is nonflammable; use agent most appropriate to extinguish surrounding fire.
No information available
Thermal decomposition can lead to release of irritating gases and vapors.
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment. Ensure adequate ventilation. Avoid contact with skin, eyes and clothing.
Should not be released into the environment. See Section 12 for additional ecological information.
Soak up with inert absorbent material. Keep in suitable, closed containers for disposal.
Materials: inert absorbent material
Related Products
Similar products with comparable safety profiles
Buffer Solution pH 7.0 (Color-Coded Yellow)
---
Buffer Solution, pH 4.00
---
Buffer solution pH4.00 (colorless), conserved
UFI: XHVV-GPU2-RA75-4C8F
Buffer Solution, pH 10.00
---
Buffer Solution pH 4.01 ± 0.02
CAS: Not applicable
Buffer Solution, pH 7.00
---
Buffer Solution pH 7.00 ± 0.02
---
Buffer solution pH 6.00
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wear personal protective equipment. Ensure adequate ventilation. Avoid contact with skin, eyes and clothing. Do not breathe vapors or spray mist.
Keep containers tightly closed in a dry, cool and well-ventilated place.
Avoid contact with skin, eyes and clothing.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, especially in confined areas. Ensure that eyewash stations and safety showers are close to the workstation location.
Wear appropriate protective gloves
Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Wear appropriate protective clothing to prevent skin exposure.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
None known, based on information available
Hazardous polymerization does not occur. None under normal processing.
Excess heat.
None known
Thermal decomposition can lead to release of irritating gases and vapors
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Buffer Solution, pH 4.00, Color-Coded Red known by?
Buffer Solution, pH 4.00, Color-Coded Red is also known as: (Certified)
What is the hazard signal word for Buffer Solution, pH 4.00, Color-Coded Red?
The signal word is no signal word.
What is the physical form of Buffer Solution, pH 4.00, Color-Coded Red?
Buffer Solution, pH 4.00, Color-Coded Red is a liquid appearing as red with red color. It has odorless odor.
What is the solubility of Buffer Solution, pH 4.00, Color-Coded Red?
Soluble in water
What is Buffer Solution, pH 4.00, Color-Coded Red used for?
Laboratory chemicals.
What is the melting point of Buffer Solution, pH 4.00, Color-Coded Red?
The melting point is 0 °C / 32 °F and the boiling point is 100 °C / 212 °F.