Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Clinell Universal Sanitising Wipes
- Product Form
- Wipes
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Cleaning and disinfecting wipes
Manufacturers & Suppliers
GAMA Healthcare Ltd
national supplier
Unit 2, The Exchange, Brent Cross Gardens, London NW4 3RJ, United Kingdom
+44 (0) 845 2011 644
Emergency Contacts
Emergency Contact
+44 (0) 207 9930 035
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Benzalkonium chloride EC: 270-325-2 | 68424-85-1 | 0.45% | Yes |
| Didecyl dimethyl ammonium chloride EC: 230-525-2 | 7173-51-5 | 0.4% | Yes |
| Polyhexamethylene biguanide (PHMB) | 27083-27-8 | 0.1% | Yes |
| N/A | --- | 75% | No |
| N/A | --- | 1% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
remove patient from exposure and give fresh air and rest. If patient continues to feel unwell, seek medical attention.
Symptoms: irritation of the airway
remove contaminated clothing and wash affected area with soap and water. If irritation occurs, seek medical attention. Launder contaminated clothing before reuse.
irrigate with water, occasionally lifting eyelids. If irritation occurs and persists seek prompt medical attention.
Symptoms: eye irritation
wash out mouth thoroughly and give water to drink. Seek medical attention if significant amounts (e.g. more than a teaspoon full) are ingested, or for any symptoms occurring after ingestions. Do not induce vomiting unless instructed by medical personnel.
Immediate Medical Attention
Seek medical attention if significant amounts (e.g. more than a teaspoon full) are ingested, or for any symptoms occurring after ingestions.
Medical Treatment
Treat symptoms as they occur
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, carbon dioxide, dry chemical and foam are compatible with the product.
The product is water based, therefore not flammable or explosive. When heated sufficiently, product may decompose to form smoke and toxic fumes, gases or vapours.
Remove containers from fire or cool them with water
Firefighter Protection
Fire fighters should wear an approved self-contained breathing apparatus and full protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Stop the source of leak or release. Clean up spill as soon as possible.
Small spills can be mopped up with dry cloth.
Collect larger spill using techniques such as sorbent materials or pumping. Follow prescribed procedures for responding to large spills and reporting to appropriate authorities.
Prevent leakage of product into water courses or drainage system by diking with sand or other absorbent material. Contact authorities, water company and waste water treatment plant as appropriate if significant contamination occurs.
Clean up spill as soon as possible. Collect larger spill using techniques such as sorbent materials or pumping. Wash contaminated surfaces with water, and collect washings for safe disposal.
Materials: dry cloth, sorbent materials
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
For industrial use of the liquid, avoid contact with skin and eyes. Wear protective clothing as in Section 8.
Store in a cool, dry, well-ventilated place, away from direct sunlight. Do not allow to freeze. Keep container closed when not in use.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
For industrial use of the liquid, good general ventilation is recommended.
Consult manufacturers concerning breakthrough times.
Prevent eye contact by wearing safety goggles PPE should be to European (EN) standards.
Not available
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage and handling conditions.
Not available
Not available
Oxidizing agents. Contact with anionic substances will reduce the effectiveness of the product
None known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Clinell Universal Sanitising Wipes?
The signal word is no signal word.
What is the physical form of Clinell Universal Sanitising Wipes?
Clinell Universal Sanitising Wipes is a moist non woven wipe appearing as moist non woven wipe . It has slight green tea perfume odor.
What is the solubility of Clinell Universal Sanitising Wipes?
Liquid is water soluble
What is Clinell Universal Sanitising Wipes used for?
Cleaning and disinfecting wipes
What is the melting point of Clinell Universal Sanitising Wipes?
The melting point is Ca. 0°C and the boiling point is Ca. 100°C.