Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Iso-Betadine® Dermicum
- Product Form
- solution for cutaneous use
- Synonyms
- Iso-Betadine Dermicum, 10%, solution for cutaneous use; Iso-Betadine Dermicum, 10%, oplossing voor cutaan gebruik; Iso-Betadine Dermique, 10%, solution pour application cutanée
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Pharmaceutical. Use only as directed. For external use only.
Uses advised against
No information available.
Manufacturers & Suppliers
Mylan Limited
Newenham Court, Northern Cross, Malahide Road, Dublin 17, Ireland
+353.1.871.1600
http://www.viatris.com/en
Emergency Contacts
ChemTel
+1-813-248-0585
24 hr.
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Substances and mixtures which are in the finished state and intended for the final user and which are medicinal products within the scope of Directive 2001/83/EC on the Community code for medicinal products for human use are on the whole exempted from the provisions of the CLP Regulation. This product is in the finished state and is therefore exempted from the provisions of the CLP regulation. A safety data sheet is not required for this product under Article 31 of REACH.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. Get medical attention immediately if symptoms occur.
Wash off immediately with soap and plenty of water for at least 15 minutes. Get medical attention if irritation develops and persists.
Symptoms: Erythema (skin redness). Itching. Burning sensation.
Get immediate medical advice/attention. Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Keep eye wide open while rinsing. Do not rub affected area.
Clean mouth with water and drink afterwards plenty of water. Never give anything by mouth to an unconscious person. Do NOT induce vomiting. Call a doctor.
Immediate Medical Attention
In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
No information available.
Not flammable.
Firefighter Protection
Firefighters should wear self-contained breathing apparatus and full firefighting turnout gear. Use personal protection equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate personnel to safe areas. Ventilate the area. Eliminate all ignition sources if safe to do so.
Prevent further leakage or spillage if safe to do so.
Carefully shovel or sweep up spilled material and place in suitable container. Soak up with inert absorbent material. Use clean non-sparking tools to collect absorbed material.
Materials: inert absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin, eyes or clothing. Do not eat, drink or smoke when using this product.
Keep at temperatures between 15 and 25 °C (59 and 77 °F). Keep containers tightly closed in a dry, cool and well-ventilated place. Keep out of the reach of children. Store locked up.
Avoid contact with skin, eyes or clothing. Wear suitable gloves and eye/face protection. Do not eat, drink or smoke when using this product.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Site-specific risk assessments should be conducted to determine the appropriate exposure control measures. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits.
Wear suitable gloves.
If splashes are likely to occur: Tight sealing safety goggles.
Use appropriate respiratory protection. In case of insufficient ventilation, wear suitable respiratory equipment.
Wear suitable protective clothing.
Do not allow into any sewer, on the ground or into any body of water.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Hazardous reactions will not occur under normal conditions.
None under normal processing.
Extremes of temperature and direct sunlight.
Strong acids. Strong bases. Strong oxidising agents.
Decomposition will not occur under normal conditions.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Iso-Betadine® Dermicum known by?
Iso-Betadine® Dermicum is also known as: Iso-Betadine Dermicum, 10%, solution for cutaneous use; Iso-Betadine Dermicum, 10%, oplossing voor cutaan gebruik; Iso-Betadine Dermique, 10%, solution pour application cutanée
What is the hazard signal word for Iso-Betadine® Dermicum?
The signal word is no signal word.
What is the physical form of Iso-Betadine® Dermicum?
Iso-Betadine® Dermicum is a liquid appearing as solution with brown color. It has no data available odor.
What is the solubility of Iso-Betadine® Dermicum?
No data available
What is Iso-Betadine® Dermicum used for?
Pharmaceutical. Use only as directed. For external use only.
What is the melting point of Iso-Betadine® Dermicum?
The melting point is No data available and the boiling point is No data available.