Spermac Stain - Fix

Allow affected person to breathe fresh air. Allow the victim to rest.

Symptoms: May cause an allergic skin reaction.

Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse. Wash with plenty of water. If skin irritation or rash occurs: get medical advice/attention. Specific treatment. Wash contaminated clothing before reuse.

Remove contact lenses, if possible. Rinse cautiously with water for several minutes. If eye irritation persists: Get medical advice/attention.

Symptoms: Causes serious eye irritation.

Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention.

Foam. Dry powder. Carbon dioxide. Water spray. Sand.

Do not use a heavy water stream.

Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Prevent fire-fighting water from entering environment.

Evacuate unnecessary personnel.

Prevent entry to sewers and public waters.

Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage.

Materials: inert solids, such as clay or diatomaceous earth

Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapour. Avoid breathing dust/fume/gas/mist/vapours/spray. Obtain special instructions before use. Use personal protective equipment as required. Do not handle until all safety precautions have been read and understood.

Keep only in the original container in a cool, well ventilated place away from direct (sun)light, ignition sources. Keep container closed when not in use. Do not freeze. Do not use after expiry date.

Wash hands, forearms and face thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Wash contaminated clothing before reuse.

USE ADEQUATE VENTILATION!

Wear protective gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to meet the specifications of regulation EU 2016/425 and the standard EN374.

Face shield and safety glasses. Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166 (EU).

Wear appropriate mask. Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).

Complete suit protecting against chemicals, flame retardant antistatic protective clothing. The type of protection must be selected according to the concentration and volume of the dangerous substance at the specific workplace

Stable after transport (max. 5 days) at elevated temperatures (≤ 37°C). Stable until expiry date indicated on the bottle label.

No additional information available

Not established.

Direct (sun)light. Extremely high or low temperatures.

Strong acids. Strong bases.

Fume. Carbon monoxide. Carbon dioxide.