Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Sheath Fluid
- Product Code
- 04-4007, 04-4007_R
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Laboratory chemicals.
Manufacturers & Suppliers
Sysmex Americas
577 Aptakisic RD, Lincolnshire, IL 60069 USA
(224) 543-9500
Emergency Contacts
Chemtel
800-255-3924
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium azide | 26628-22-8 | 0.05% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air.
Wash off immediately with plenty of water for at least 15 minutes.
Rinse thoroughly with plenty of water for at least 15 minutes, lifting lower and upper eyelids. Consult a physician.
Clean mouth with water and drink afterwards plenty of water.
Immediate Medical Attention
Consult a physician.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam. Extinguishing powder. Carbon dioxide (CO2). Water spray (fog).
High power water jet.
In the event of fire, the following can be released: Carbon dioxide (CO2); Carbon monoxide (CO); Nitrogen oxides (NOx).
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment as required.
Do not discharge into the drains/surface waters/groundwater. See Section 12 for additional Ecological Information.
Keep in suitable, closed containers for disposal.
Materials: suitable, closed containers
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle in accordance with good industrial hygiene and safety practice.
Keep containers tightly closed in a dry, cool and well-ventilated place.
Handle in accordance with good industrial hygiene and safety practice.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Showers. Eyewash stations. Ventilation systems.
Wear protective gloves
Safety glasses.
In case of inadequate ventilation wear respiratory protection.
Wear protective clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Not reactive under normal conditions.
None under normal processing.
Keep out of reach of children.
Oxidizing agents. Strong acids. Strong bases.
None known based on information supplied.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Sheath Fluid?
The signal word is no signal word.
What is the physical form of Sheath Fluid?
Sheath Fluid is a liquid appearing as opaque liquid with not determined color. It has odorless odor.
What is Sheath Fluid used for?
Laboratory chemicals.
What is the melting point of Sheath Fluid?
The melting point is Not determined and the boiling point is Not determined.