NextSDS Logo
Safety Data Sheet EN

MOLYKOTE(R) G-0052 FG WHITE EP BEARING GREASE

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
MOLYKOTE(R) G-0052 FG WHITE EP BEARING GREASE

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Lubricants and additives

Uses advised against

None known.

Manufacturers & Suppliers

D

Dow Corning Europe S.A.

manufacturer

rue Jules Bordet - Parc Industriel - Zone C, B-7180 Seneffe, Belgium

+49 611237507

Emergency Contacts

Dow Corning (Barry U.K.)

+44 1446732350

24h

Dow Corning (Wiesbaden)

+49 61122158

24h

Dow Corning (Seneffe)

+32 64 888240

24h

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified na: r-phrases

Hazard Classifications

Aquatic Chronic

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
White mineral oil (petroleum) EC: 232-455-8 8042-47-5 74% No
Zinc oxide EC: 215-222-5 1314-13-2 5% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air.

Skin contact

No first aid should be needed.

Eye contact

No first aid should be needed.

Ingestion

No first aid should be needed.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

On large fires use dry chemical, foam or water spray (fog). On small fires use carbon dioxide (CO2), dry chemical or water spray. Water can be used to cool fire exposed containers.

Unsuitable media

None known.

Specific hazards

None known.

Instructions

Use water spray to keep fire exposed containers cool.

Firefighter Protection

A self-contained respirator and protective clothing should be worn. Determine the need to evacuate or isolate the area according to your local emergency plan.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Wear proper protective equipment.

Environmental

Prevent from spreading or entering into drains, ditches or rivers by using sand, earth or other appropriate barriers.

Cleanup methods

Scrape up and place in a container fitted with a lid.

Materials: container fitted with a lid

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid eye contact. Do not breathe spray or mist. Do not breathe vapour.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ventilation : Refer to Section 7.1

Hands

Gloves are not normally required.

Eyes

Safety glasses should be worn.

Respiratory

Suitable respiratory protection should be worn if the product is used in large quantities, confined spaces or in other circumstances where the OEL may be approached or exceeded. A suitable respirator must be worn if the product is used in any circumstances where an aerosol or mist may be generated, such as during spraying or similar activities. Depending on the working conditions, wear a respiratory mask with filter(s) BP or use a self-contained respirator. The choice of a filter type depends on the amount and type of chemical being handled in the workplace. Regarding filter characteristics, contact your respiratory protection supplier.

Skin/Body

Protective equipment is not normally necessary.

Environmental

Refer to section 6 and 12.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Grease
Explosive Limits
---
Form
Grease
Flammability
---
Bulk Density
---
State Under Standard Conditions
---
Molecular Weight
---
Relative Density
0.89
Solubility In Fat
---
Upper Explosive Limit
---
Crystallisation Point
---
Properties Status
---
Ph
---
Vapor Pressure
---
Softening Point
---
Melting Point
---
Voc Content
---
Vapor Density
---
Metal Corrosion
---
Auto Ignition Temperature
---
Odor
Slight
Solubility In Water
---
Relative Evaporation Rate
---
Colour Intensity
---
Boiling Point
---
Colour
White
Decomposition Temperature
---
Physical State Data
solid
Kinematic Viscosity
---
Evaporation Rate
---
Appearance
---
Solubility
---
Freezing Point
---
Odor Threshold
---
Solidification Point
---
Density
---
Lower Explosive Limit
---
Flash Point
---
Dynamic Viscosity
---
Partition Coefficient
---
Cloud Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal usage conditions.

Reactivity

None known.

Hazardous reactions

None known.

Avoid

None established.

Incompatible

Can react with strong oxidising agents.

Decomposition

Thermal breakdown of this product during fire or very high heat conditions may evolve the following decomposition products: Carbon oxides and traces of incompletely burned carbon compounds. Formaldehyde.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN3077
Shipping Name
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S.(Zinc Oxide)
Transport Class
9
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for MOLYKOTE(R) G-0052 FG WHITE EP BEARING GREASE?

The signal word is na: r-phrases.

What is the physical form of MOLYKOTE(R) G-0052 FG WHITE EP BEARING GREASE?

MOLYKOTE(R) G-0052 FG WHITE EP BEARING GREASE is a grease with white color. It has slight odor.

What is MOLYKOTE(R) G-0052 FG WHITE EP BEARING GREASE used for?

Lubricants and additives