Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- WABCOTHYL
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Refer to description of material or preparation.
Manufacturers & Suppliers
Kraul & Wilkening u. Stelling KG GmbH & Co.
manufacturer
Lohweg 39, D-30559 Hannover
++49 (0) 511/51005-0
Emergency Contacts
Kraul & Wilkening u. Stelling KG GmbH & Co.
++49 (0) 511/51005-33
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Butanone EC: 201-159-0 | --- | 1 - 20% | Yes |
| Ethanediol EC: 203-473-3 | --- | 1 - 20% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply person with fresh air and consult doctor according to symptoms. Remove person from danger area.
Wash thoroughly with soap and copious water - remove contaminated clothing immediately. If skin irritation occurs (redness etc.), consult doctor.
Symptoms: redness
Wash thoroughly for several minutes using copious water. Seek medical help if necessary.
Do not induce vomiting. Consult doctor immediately.
Immediate Medical Attention
Consult doctor immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol resistant foam, Water jet spray, CO2
High volume water jet
Oxides of carbon, Explosive vapour/air mixture, Dangerous vapours heavier than air.
Cool container at risk with water.
Firefighter Protection
Protective respirator with independent air supply, Full protection, if necessary
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
If leakage occurs, dam up.
Collect using absorbant material
Materials: Universal binding medium
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from sources of ignition - Do not smoke. Only use working methods according to operating instructions. Ensure good ventilation. Take precautions against electrostatic charges. Use explosion-proof equipment. Observe directions on label and instructions for use. See point 6.1
Store VbF products only in the specially provided installation. Not to be stored in gangways or stair wells. Store products only unopened, in original packing. Solvent resistant floor. Store cool. Protect from direct sunlight and warming.
Keep away from sources of ignition - Do not smoke. Take precautions against electrostatic charges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation. This can be achieved by local suction or general air extraction.
Solvent resistant protective gloves (EN 374). Protective hand cream recommended. Protective nitrile gloves (EN 374). Additional information on hand protection - No tests have been performed. Selection made for preparations according to the best available knowledge and information on the ingredients. Selection of materials derived from glove manufacturer's indications. Final selection of glove material must be made taking the breakthrough times, permeation rates and degradation into account. Selection of a suitable glove depends not only on the material but also on other quality characteristics and varies from manufacturer to manufacturer. In the case of preparations the resistance of glove materials cannot be calculated in advance so it has to be tested before use. The exact breakthrough time of the glove material can be requested from the protective glove manufacturer and must be observed.
Tight fitting protective goggles (EN 166) with side protection, with danger of projections.
If OES-, MEL- or MAK-value is exceeded. Gas mask filter A (EN 141)
Protective working garments (e.g. safety shoes EN 344, long-sleeved protective working garments) According to operation. Apron. Boots (EN 347)
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Heating, open flame, ignition sources, Electrostatic charge
Other chemicals, strong oxidizing agents, strong acids, Peroxides, Acid chlorides, Alkali metals
See point 5.3
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1170
- Shipping Name
- ETHANOL SOLUTION
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for WABCOTHYL?
The signal word is danger.
What is the physical form of WABCOTHYL?
WABCOTHYL is a liquid with blue color. It has alcoholic odor.
What is WABCOTHYL used for?
Refer to description of material or preparation.
What are the hazard statements for WABCOTHYL?
This substance has 1 hazard statement:
- H224: Product is highly flammable.
What is the melting point of WABCOTHYL?
The melting point is - 114 °C and the boiling point is 78 °C.