RUBIA TIR 7900 15W40

IF INHALED: Remove to fresh air and keep at rest in a position comfortable for breathing. If not breathing, give artificial respiration. Avoid direct contact with skin. Use barrier to give mouth-to-mouth resuscitation. Get medical attention immediately if symptoms occur.

Symptoms: Inhalation of vapors in high concentration may cause irritation of respiratory system.

Flush with water. Get medical attention immediately if symptoms occur. Wash contaminated clothing before reuse.

Symptoms: Not classified. Itching. Redness.

Keep eye wide open while rinsing. Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention immediately if irritation persists.

Symptoms: Causes serious eye irritation.

Clean mouth with water. Remove from exposure, lie down. Drink 1 or 2 glasses of water. Get medical attention immediately if symptoms occur. Do NOT induce vomiting. Never give anything by mouth to an unconscious person.

Symptoms: Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhea.

Foam. Carbon dioxide (CO₂). Dry chemical.

Do not use a solid water stream as it may scatter and spread fire.

Incomplete combustion and thermolysis may produce gases of varying toxicity such as carbon monoxide, carbon dioxide, various hydrocarbons, aldehydes and soot. These may be highly dangerous if inhaled in confined spaces or at high concentration.

Evacuate non-essential personnel.

Use personal protective equipment. Avoid contact with the skin and the eyes. Evacuate personnel to safe areas. Keep people away from and upwind of spill/leak. Do not touch or walk through spilled material. Contaminated surfaces will be extremely slippery.

Prevent entry into waterways, sewers, basements or confined areas. Do not flush into surface water or sanitary sewer system. Prevent further leakage or spillage if safe to do so. Prevent product from entering drains. Do not allow material to contaminate ground water system. Local authorities should be advised if significant spillages cannot be contained. Try to prevent the material from entering drains or water courses.

Soak up with inert absorbent material. Collect with non-combustible absorbent material. Use mechanical means such as pumps, skimmers and absorbent materials.

Materials: non-combustible absorbent material (e.g. sand, earth, diatomaceous earth, vermiculite)

Wear personal protective equipment. Use only in area provided with appropriate exhaust ventilation. Prevent the formation of vapors, mists and aerosols. When using, do not eat, drink or smoke. For personal protection see section 8. Use only in well-ventilated areas. Do not breathe vapors or spray mist. Avoid contact with skin, eyes and clothing.

Keep out of reach of children. Keep containers tightly closed in a cool, well-ventilated place. Keep in properly labeled containers. Keep away from food, drink and animal feedingstuffs. Keep in a bunded area. Keep preferably in the original container. Protect from frost, heat and sunlight. Protect from moisture.

When using, do not eat, drink or smoke. Remove and wash contaminated clothing before re-use. Regular cleaning of equipment, work area and clothing is recommended. Ensure the application of strict rules of hygiene by the personnel exposed to the risk of contact with the product. Use personal protective equipment as required. Wash hands before breaks and at the end of workday. Avoid breathing vapors, mist or gas. Do not use abrasives, solvents or fuels. Do not dry hands with rags that have been contaminated with product. Do not put product contaminated rags into workwear pockets.

Design the installations in order to avoid accidental emissions of product (due to seal breakage, for example) onto hot casings or electrical contacts.

Apply technical measures to comply with the occupational exposure limits. When working in confined spaces (tanks, containers, etc.), ensure that there is a supply of air suitable for breathing and wear the recommended equipment.

Impervious gloves. Protective gloves. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time.

If splashes are likely to occur, wear: Safety glasses with side-shields.

If exposure limits are exceeded or irritation is experienced, NIOSH/MSHA approved respiratory protection should be worn. Positive-pressure supplied air respirators may be required for high airborne contaminant concentrations. Respiratory protection must be provided in accordance with current local regulations.

Wear suitable protective clothing. Protective shoes or boots.

Stable under recommended storage conditions.

No information available.

None under normal processing.

No information available.

Strong oxidizing agents.

None under normal use.