NextSDS Logo
Safety Data Sheet EN

AZOLLA ZS 100

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
AZOLLA ZS 100
Product Form
Mixture
Product Code
150

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Hydraulic oil.

Manufacturers & Suppliers

T

TOTAL LUBRIFIANTS

562 Avenue du Parc de L'ile, 92029 Nanterre Cedex

+33 (0)1 41 35 40 00

Emergency Contacts

Emergency Contact

+33 1 49 00 00 49

24h/24, 7d/7

ORFILA (INRS)

+33 (0)1 45 42 59 59

Hôpital Fernand Widal

01.40.05.48.48

Hopital Salvator

04.91.75.25.25

Hopital Edouard Herriot

04.72.11.69.11

Hopital central

03.83.32.36.36

SAMU

15

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Do not contain hazardous substance nor substance with european workplace exposure limits in concentration above regulatory thresholds

Product containing mineral oil with less than 3% DMSO extract as measured by IP 346

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air.

Symptoms: Not classified. Inhalation of vapors in high concentration may cause irritation of respiratory system.

Skin contact

Remove contaminated clothing and shoes. Wash skin with soap and water. Wash contaminated clothing before reuse.

Symptoms: Not classified. High pressure injection of the products under the skin may have very serious consequences even though no symptom or injury may be apparent.

Eye contact

Rinse thoroughly with plenty of water, also under the eyelids.

Symptoms: Not classified.

Ingestion

If swallowed, do not induce vomiting - seek medical advice.

Symptoms: Not classified. Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhea.

Immediate Medical Attention

IN CASE OF SERIOUS OR PERSISTENT CONDITIONS, CALL A DOCTOR OR EMERGENCY MEDICAL CARE.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Carbon dioxide (CO₂). ABC powder. Foam. Water spray or fog.

Unsuitable media

Do not use a solid water stream as it may scatter and spread fire.

Specific hazards

Incomplete combustion and thermolysis may produce gases of varying toxicity such as carbon monoxide, carbon dioxide, various hydrocarbons, aldehydes and soot. These may be highly dangerous if inhaled in confined spaces or at high concentration.

Instructions

Cool containers / tanks with water spray.

Firefighter Protection

Wear self-contained breathing apparatus and protective suit.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Do not touch or walk through spilled material. Contaminated surfaces will be extremely slippery. Use personal protective equipment. Ensure adequate ventilation. Remove all sources of ignition.

Environmental

Do not allow material to contaminate ground water system. Try to prevent the material from entering drains or water courses.

Cleanup methods

collect with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and place in container for disposal according to local / national regulations. Keep in suitable, closed containers for disposal.

Materials: non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite)

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

When using, do not eat, drink or smoke. For personal protection see section 8. Use only in well-ventilated areas. Do not breathe vapors or spray mist. Avoid contact with skin, eyes and clothing.

Storage

Keep away from food, drink and animal feedingstuffs. Keep in a bunded area. Keep container tightly closed. Keep preferably in the original container. Otherwise reproduce all indication of the regulation label on the new container. Do not remove the hazard labels of the containers (even if they are empty). Protect from frost, heat and sunlight. Protect from moisture.

Hygiene

Ensure the application of strict rules of hygiene by the personnel exposed to the risk of contact with the product. Regular cleaning of equipment, work area and clothing is recommended. Wash hands before breaks and immediately after handling the product. Do not use abrasives, solvents or fuels. Do not dry hands with rags that have been contaminated with product. Do not put product contaminated rags into workwear pockets.

Fire prevention

Take precautionary measures against static discharges. Ground/bond containers, tanks and transfer/receiving equipment.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Apply technical measures to comply with the occupational exposure limits. When working in confined spaces (tanks, containers, etc.), ensure that there is a supply of air suitable for breathing and wear the recommended equipment.

Hands

Hydrocarbon-proof gloves: Fluorinated rubber, Nitrile rubber. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion. If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the EC approved gloves.

Eyes

If splashes are likely to occur, wear: Safety glasses with side-shields.

Respiratory

When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. Respirator with combination filter for vapour/particulate (EN 14387). The use of breathing apparatus must comply strictly with the manufacturer's instructions and the regulations governing their choices and uses.

Skin/Body

Wear suitable protective clothing. Protective shoes or boots. Long sleeved clothing.

Environmental

The product should not be allowed to enter drains, water courses or the soil.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Odor
Characteristic
Bulk Density
---
Lower Explosive Limit
---
Kinematic Viscosity
100 mm2/s @ 40 °C; 11.2 mm2/s @ 100 °C
Cloud Point
---
Softening Point
---
Crystallisation Point
---
Flammability
---
Auto Ignition Temperature
> 250 °C / > 482 °F
Solidification Point
---
Vapor Density
---
Ph
Not applicable
Physical State
liquid
Evaporation Rate
---
Partition Coefficient
No information available
Molecular Weight
---
Dynamic Viscosity
---
Solubility In Water
Insoluble
Relative Density
---
Upper Explosive Limit
---
Density
888 kg/m³
Flash Point
254 °C / 489 °F
Boiling Point
No information available
Physical State Data
liquid
Decomposition Temperature
---
Vapor Pressure
---
Explosive Limits
---
Form
---
Colour
yellow
Odor Threshold
---
Relative Evaporation Rate
---
State Under Standard Conditions
---
Appearance
limpid
Properties Status
---
Solubility In Fat
---
Colour Intensity
---
Voc Content
---
Freezing Point
---
Metal Corrosion
---
Solubility
---
Melting Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Reactivity

No information available.

Hazardous reactions

None under normal processing.

Avoid

Heat (temperatures above flash point), sparks, ignition points, flames, static electricity.

Incompatible

Strong oxidizing agents.

Decomposition

None under normal use.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for AZOLLA ZS 100?

The signal word is no signal word.

What is the physical form of AZOLLA ZS 100?

AZOLLA ZS 100 is a liquid appearing as limpid with yellow color. It has characteristic odor.

What is AZOLLA ZS 100 used for?

Hydraulic oil.