Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- VICIR E-PVC
- Chemical Name
- Polyvinyl chloride, PVC
- Synonyms
- VICIR E 1270P, E 1271P, E 1280P, E 1570P, E 1970P
Regulatory Identifiers
- CAS Number
- 9002-86-2 Check regulations →
- REACH No.
- exempt (polymer)
Identified Uses
Raw material for plastic goods.
Uses advised against
No information available.
Manufacturers & Suppliers
Companhia Industrial de Resinas Sintéticas, CIRES Lda.
manufacturer
P.O. Box 20, Samouqueiro-Avanca, 3864-752 ESTARREJA -PORTUGAL
+351 234 811 200
Emergency Contacts
National Poisons Information Service (London Centre)
+44 20 7771 5307
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Polyvinyl chloride | 9002-86-2 | 98% | No |
| Surfactants | --- | 2% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air, rest, half upright position and loosen clothing. Oxygen or artificial respiration if there is difficulty in breathing. Seek medical advice after significant exposure.
Symptoms: Dust may be irritating to the respiratory tract and cause symptoms of bronchitis. Vapours may cause irritation to nose and throat and upper respiratory tract (this is only possible by exposure to hot product).
If splashed by hot liquid, cool with water.
Rinse immediately and as long as possible with plenty of water. Eyelids should be held away from the eyeball to ensure thorough rinsing. Seek medical advice if irritation persists.
Rinse mouth, give water to drink. Always seek medical attention.
Immediate Medical Attention
Always seek medical attention (ingestion), seek medical advice after significant exposure (inhalation), seek medical advice if irritation persists (eye).
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, water spray, dry powder or carbon dioxide.
None known.
Thermal decomposition can lead to the release of irritating gases and vapours (carbon oxides and hydrogen chloride gas).
Avoid dust formation.
Firefighter Protection
Wear self-contained breathing apparatus and protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not breathe dust. Do not smoke. Ventilate the area.
The material should not be released into the environment.
Sweep up and shovel into suitable containers for disposal.
Materials: suitable containers
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only in well ventilated areas. In case of insufficient ventilation, wear suitable respiratory equipment. Avoid dust generation. Avoid breathing dust. Do not eat, drink or smoke when using this product. Remove all sources of ignition: heat, flames and sparks. All equipment used when handling the product must be grounded.
Keep tightly closed in a dry and cool place. Keep at temperatures below 30°C.
Do not eat, drink or smoke when using this product.
Remove all sources of ignition: heat, flames and sparks.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation, especially in confined areas.
No specific equipment required.
Tightly fitting safety goggles.
In case of insufficient ventilation wear face mask. Recommended filter type: P2.
No specific equipment required.
The product should not enter drains, water courses or the soil.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable up to 60°C.
Stable under recommended storage conditions.
Hazardous polymerisation does not occur.
Keep away from open flames, hot surfaces and sources of ignition. Avoid dust formation. Protect from moisture.
None in particular.
Hydrogen chloride gas (HCl), carbon monoxide (CO).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is VICIR E-PVC known by?
VICIR E-PVC is also known as: VICIR E 1270P, E 1271P, E 1280P, E 1570P, E 1970P
What is the hazard signal word for VICIR E-PVC?
The signal word is no signal word.
What is the physical form of VICIR E-PVC?
VICIR E-PVC is a solid white powder appearing as solid white powder . It has odourless odor.
What is VICIR E-PVC used for?
Raw material for plastic goods.
What is the melting point of VICIR E-PVC?
The melting point is Not applicable and the boiling point is Not applicable.